BOMwiki the bill-of-materials encyclopedia
30,441,948 parts mapped · 192,925 items

Change #15

Accepted by sd on 2026-09-16 01:39. It is live on the pages below; each page's History tab shows the resulting revision.

Change #15 · Add one-sentence summaries to shared components (batch 3 of 10) accepted

by sd · 2026-09-16 01:39 · 20 nodes

Seat Frame seat-frame

  • summary set to "Welded steel or aluminium structure that carries the seat cushion, back, and belt loads and anchors the seat to the floor."

Seat Cover seat-cover

  • summary set to "Sewn fabric, vinyl, or leather trim stretched over the seat foam to form the visible, wearing surface of the seat."

Seat Motor seat-motor

  • summary set to "Small geared DC motor that drives a seat adjuster to move the cushion, backrest, or height."

IGBT Power Module igbt-module

  • summary set to "Insulated-gate bipolar transistor module: a half-bridge or six-pack of power switches on one substrate that forms the switching stage of an inverter or drive."

Seat Heater Mat seat-heater

  • summary set to "Thin resistive heating mat laminated under the seat cover that warms the cushion and backrest."

Seat Assembly seat-assembly

  • summary set to "Complete seat: frame, foam, cover, adjusters, and heater, built as one unit and bolted into the cabin."

Linear Guide Rail linear-guide

  • summary set to "Ground steel rail and recirculating-ball carriage that guide a moving axis in a straight line with high stiffness and low friction."

CMOS Image Sensor image-sensor

  • summary set to "CMOS image sensor: a silicon array of photodiodes that converts light focused by the lens into a digital image."

Li-ion Cell, 18650 li-cell-18650

  • summary set to "Cylindrical lithium-ion cell, 18 mm by 65 mm, the standard building block of tool, scooter, and backup battery packs."

12 V Battery lv-battery

  • summary set to "12 V lead-acid or lithium battery that powers the vehicle's low-voltage electronics and starts or wakes the main system."

Coolant Pump coolant-pump

  • summary set to "Electric or belt-driven centrifugal pump that circulates coolant through the engine, motor, battery, or heat exchanger."

Hall Sensor hall-sensor

  • summary set to "Semiconductor sensor that detects a magnetic field and reports the position of a rotor magnet or a moving part as a digital or analogue signal."

Lens Assembly camera-lens

  • summary set to "Multi-element lens assembly in a barrel that focuses the scene onto the image sensor with a fixed or adjustable focal length."

Speaker speaker

  • summary set to "Electrodynamic loudspeaker: a voice coil in a magnet gap driving a cone or diaphragm to turn an audio signal into sound."

Radiator radiator

  • summary set to "Finned aluminium heat exchanger that passes hot coolant through thin tubes so air flowing across the fins carries the heat away."

LiPo Cell lipo-cell

  • summary set to "Lithium-polymer pouch cell with a flat, flexible aluminium-laminate case, chosen where light weight and high discharge current matter."

Gate Driver IC gate-driver-ic

  • summary set to "Integrated circuit that turns a logic-level control signal into the fast, high-current gate pulses needed to switch a MOSFET or IGBT."

DC-Link Capacitor dc-link-cap

  • summary set to "Large film or electrolytic capacitor across the DC bus of an inverter or converter that smooths voltage ripple and supplies switching current."

Brake Disc (rotor) brake-disc

  • summary set to "Cast-iron or steel disc bolted to the hub that the brake pads clamp to slow the wheel, shedding the heat through vanes or its faces."

CAN Transceiver can-transceiver

  • summary set to "Interface chip that converts a controller's logic signals to the differential CAN bus levels and back, letting control units talk to each other."

Machine findings

  • Seat Assembly: 5 direct children (dominant function: Support structure) — worth checking for integration or standardization
  • All-Terrain Vehicle (ATV) functions after this change: Fasten or join, Communicate signal, Transmit motion
  • Electric Car functions after this change: Store energy, Filter or clean, Convert energy
  • CNC Milling Machine functions after this change: Filter or clean, Convert energy, Human interface