Change #19
Accepted by sd on 2026-09-16 01:39. It is live on the pages below; each page's History tab shows the resulting revision.
Change #19 · Add one-sentence summaries to shared components (batch 7 of 10) accepted
HMI Panel hmi-panel
- summary set to "Operator touchscreen and key panel through which a machine is set up, run, and monitored."
Floor Carpet carpet
- summary set to "Moulded, backed carpet that covers the floor pan and damps road noise."
GPS Module gps-module
- summary set to "Receiver module with antenna that computes position and time from GNSS satellite signals."
EPS Motor steering-motor
- summary set to "Brushless motor on the steering rack or column that adds assist torque in an electric power steering system."
Control Arm control-arm
- summary set to "Steel or aluminium suspension link that locates the wheel hub and lets it move up and down on rubber bushings and a ball joint."
Brake Corner brake-corner
- summary set to "Complete brake at one wheel: disc, caliper, pads, and hose, assembled to the hub."
Steering Rack (EPS) steering-rack
- summary set to "Electric power steering rack combining the rack and pinion gear, the assist motor, torque sensor, and tie rods."
Dashboard dashboard
- summary set to "Instrument panel structure with its trim, displays, vents, and controls that spans the cabin in front of the occupants."
Chain chain
- summary set to "Roller chain of linked steel plates and rollers that transmits power between sprockets."
I/O Board io-board
- summary set to "Input/output board that interfaces a controller with the machine's sensors, switches, valves, and indicators."
Coolant Tank coolant-tank
- summary set to "Reservoir that holds the coolant supply, allows for expansion, and returns fluid to the pump."
Hinge hinge
- summary set to "Pivot fitting of two leaves on a pin that lets a door, lid, or panel swing open."
Spoke spoke
- summary set to "Tensioned steel wire that connects the hub to the rim and carries the wheel load."
ESC esc
- summary set to "Electronic speed controller that switches a brushless motor's phases from the battery according to the throttle command."
Barometer barometer
- summary set to "Barometric pressure sensor that measures air pressure to estimate altitude and vertical speed."
Propeller propeller
- summary set to "Rotating blade set that converts motor torque into thrust by accelerating air or water."
XT60 Connector xt60-connector
- summary set to "Yellow polarised power connector rated around 60 A that joins a lithium battery pack to its load."
Polycarbonate Window window-polycarbonate
- summary set to "Impact-resistant polycarbonate viewing window set into a machine guard so the process can be watched safely."
Suspension Corner suspension-corner
- summary set to "Complete suspension at one wheel: control arms, spring, damper, hub, and joints."
Door Assembly door-assembly
- summary set to "Complete door: shell, glass, regulator, latch, mirror, trim, and wiring, hung on its hinges."
Machine findings
- CNC Milling Machine functions after this change: Filter or clean, Convert energy, Human interface
- Door Assembly: 6 direct children (dominant function: Seal or contain) — worth checking for integration or standardization
- Suspension Corner: 5 direct children (dominant function: Regulate flow) — worth checking for integration or standardization
- Electric Car functions after this change: Store energy, Filter or clean, Convert energy
- ESC: 4 direct children (dominant function: Control or compute) — worth checking for integration or standardization
- Quadcopter Drone functions after this change: Convert energy, Filter or clean, Control or compute