Change #56

Accepted by sd on 2026-09-27 06:46. It is live on the pages below; each page's History tab shows the resulting revision.

Change #56 · Reviewed AI-assisted priority-page corrections; batch priority-repair-2026-09-26; sources reviewed 2026-09-26. Verification and indexing policy unchanged. accepted

by sd · 2026-09-27 06:46 · 14 nodes

Electric Kettle electric-kettle

summary changed to "Parts of a cordless electric kettle, using a variable-temperature example: water vessel, concealed heater, controls and a detachable mains power base."
Article updated (+221 words)
Spec Scope added: "Generic variable-temperature kettle; no manufacturer model specified"
Spec Heating arrangement added: "Concealed element beneath the vessel floor"
Spec Power connection added: "Detachable mains base; cordless for pouring"
Spec Temperature control in this BOM added: "Electronic board and NTC sensor"
Spec Protection functions represented added: "Steam shutoff and dry-boil cutout; packaging varies by model"
Spec Ratings and dimensions added: "Not specified; use the actual appliance label and manual"
Spec Type removed
Spec Rated power removed
Spec Voltage removed
Spec Capacity removed
Spec Body material removed
Spec Heating removed
Spec Temperature range removed
Spec Boil time removed
Spec Control removed
Spec Sensor removed
Spec Safety removed
Spec Connector removed
Spec Weight removed
Spec Dimensions removed
Control Assembly note updated
Power Base note updated

Toaster toaster

summary changed to "Parts of a two-slice pop-up toaster: heating elements, bread carriage, powered latch, browning controls, crumb tray and mains wiring. Designs vary by model."
Article updated (+250 words)
Spec Scope added: "Generic two-slice pop-up toaster; no manufacturer model specified"
Spec Heating arrangement in this BOM added: "Resistance elements supported by mica insulation"
Spec Carriage arrangement in this BOM added: "Spring return with electrically held latch"
Spec Controls represented added: "Browning setting, bagel, defrost and cancel; behavior varies by model"
Spec Electrical protection represented added: "Thermal fuse; exact rating not specified"
Spec Ratings, materials and dimensions added: "Use the actual model's label and parts documentation"
Spec Type removed
Spec Rated power removed
Spec Voltage removed
Spec Slots removed
Spec Heating elements removed
Spec Element material removed
Spec Latch removed
Spec Browning control removed
Spec Modes removed
Spec Shell removed
Spec Crumb tray removed
Spec Safety removed
Spec Weight removed
Spec Dimensions removed

Control Assembly electric-kettle-control-assembly

Mortise Lock mortise-lock-set

summary changed to "A mechanical mortise lock arranged as a recessed case, keyed cylinder, handles, spring latch, manual deadbolt and frame strike. The BOM is a generic example, not a manufacturer's replacement-parts list."
Article updated (-875 words)
Spec Type changed to "Mechanical mortise lock; also spelled mortice lock"
Spec Modeled arrangement added: "Keyed cylinder, handles, spring latch and manually operated deadbolt"
Spec Modeled cylinder added: "Five pin stacks in this example; not a universal mortise-cylinder specification"
Spec Door preparation added: "Use the selected lock manufacturer's template; dimensions are not established for this generic BOM"
Spec Lock function added: "Outside-handle locking and deadbolt operation depend on the selected function"
Spec Product certification added: "No manufacturer, model or certified performance grade established for this example"
Spec Installation removed
Spec Bolt Configuration removed
Spec Pin Stack removed
Spec Latch Travel removed
Spec Deadbolt Travel removed
Spec Door Weight Range removed
Spec Finish Options removed
Spec ANSI Grade removed
Spec Cycle Life removed
Lock Case note updated
Cylinder Unit note updated
Lever Knobs note updated
Latch Assembly note updated
Faceplate note updated
Strike Plate note updated
Fasteners note updated

Faceplate mortise-lock-set-faceplate

summary changed to "Door-edge faceplate and mounting fasteners, covering the front of the recessed lock case around its bolt openings."
Faceplate Material note updated
Fastener Set note updated
Removed Faceplate Finish

Mortise Lock Faceplate Strip mortise-lock-set-faceplate-material

name changed to "Mortise Lock Faceplate Strip"
summary changed to "Physical plate on the door edge with openings for the modeled lock bolts. Material, dimensions and surface finish depend on the selected lock."

Latch Assembly mortise-lock-set-latch-assembly

summary changed to "Modeled spring latch, manually operated deadbolt and associated springs and linkage. The deadbolt is not automatically projected by the latch spring."
Latch Bolt note updated
Deadbolt note updated
Latch Spring note updated
Deadbolt Spring note updated
Bolt Link note updated

Deadbolt Spring mortise-lock-set-deadbolt-spring

summary changed to "Modeled spring associated with the mortise lock's deadbolt operating mechanism. Its exact action requires the selected lock's parts drawing; it does not imply automatic projection of the deadbolt."

Latch Bolt mortise-lock-set-latch-bolt

summary changed to "Spring-returned beveled latch that enters the frame strike when the door closes. Latching alone does not determine whether the outside handle is locked."

Cylinder Unit mortise-lock-set-cylinder-unit

summary changed to "Illustrative five-stack pin-tumbler mortise cylinder with plug, housing, pins, springs and drive cam. Actual cylinder formats, pin counts and cams vary by product."
Plug note updated
Bible note updated
Driver Pins note updated
Key Pins note updated
Coil Spring note updated
Tailpiece note updated

Mortise Cylinder Cam mortise-lock-set-tailpiece

name changed to "Mortise Cylinder Cam"
summary changed to "Output cam rotating with the keyed cylinder to operate the mortise lock mechanism. Cam shape and cylinder format must match the selected lock."

Bolt Cam mortise-lock-set-bolt-cam

summary changed to "Modeled internal operating cam in the mortise lock's bolt mechanism. Its connection to the cylinder drive and its motion depend on the selected lock function."

Machine findings

Electric Kettle: 6 direct children (dominant function: Connect electrically) — worth checking for integration or standardization
Control Assembly: 6 direct children (dominant function: Communicate signal) — worth checking for integration or standardization
Electric Kettle functions after this change: Communicate signal, Connect electrically, Human interface
Toaster: 11 direct children (dominant function: Fasten or join) — worth checking for integration or standardization
Browning Control Assembly: 9 direct children (dominant function: Human interface) — worth checking for integration or standardization
Electromagnetic Latch Assembly: 3 direct children (dominant function: Store material) — worth checking for integration or standardization
Toaster functions after this change: Connect electrically, Fasten or join, Guide motion
Mortise Lock: 7 direct children (dominant function: Fasten or join) — worth checking for integration or standardization
Cylinder Unit: 6 direct children (dominant function: Support structure) — worth checking for integration or standardization
Latch Assembly: 5 direct children (dominant function: Fasten or join) — worth checking for integration or standardization
Mortise Lock functions after this change: Fasten or join, Human interface, Communicate signal