Twin-Shaft Mixer Assembly
Two counter-rotating paddle shafts that intensively blend the batch, driven through reduction gearboxes. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour product / assembly shared across products atomic part related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials
7 top-level lines · 26 rows shown · 96 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Mixer Paddle Shaft 3 parts | cbp-mixer-shaft | 2× | 2 | 5 | assembly |
| 1.1 | Shaft Bar | cbp-shaft-bar | 1× | 2 | — | part |
| 1.2 | Ball Bearing | ball-bearing | 2× | 4 | — | part |
| 1.3 | Oil Seal | oil-seal | 2× | 4 | — | part |
| 2 | Mixing Paddle | cbp-mixer-paddle | 24× | 24 | — | part |
| 3 | Mixer Drive Motor 4 parts | cbp-mixer-motor | 2× | 2 | 25 | assembly |
| 3.1 | Stator Assembly 3 parts | stator-assembly | 1× | 2 | 3 | assembly |
| 3.1.1 | Stator Core (laminations) | stator-core | 1× | 2 | — | part |
| 3.1.2 | Copper Winding | copper-winding | 1× | 2 | — | part |
| 3.1.3 | Slot Insulation | stator-insulation | 1× | 2 | — | part |
| 3.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 2 | 19 | assembly |
| 3.2.1 | Rotor Shaft | rotor-shaft | 1× | 2 | — | part |
| 3.2.2 | Rotor Core | rotor-core | 1× | 2 | — | part |
| 3.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 32 | — | part |
| 3.2.4 | Ball Bearing | ball-bearing | 1× | 2 | — | part |
| 3.3 | Motor Housing | motor-housing | 1× | 2 | — | part |
| 3.4 | Ball Bearing | ball-bearing | 2× | 4 | — | part |
| 4 | Gearbox Housing | gearbox-housing | 2× | 2 | — | part |
| 5 | Helical Gear Pair | gear-pair | 4× | 4 | — | part |
| 6 | Wear Liner Plate | cbp-mixer-liner | 1× | 1 | — | part |
| 7 | Mixer Discharge Gate 2 parts | cbp-discharge-gate | 1× | 1 | 5 | assembly |
| 7.1 | Gate Plate | cbp-gate-plate | 1× | 1 | — | part |
| 7.2 | Pneumatic Gate Cylinder 3 parts | cbp-gate-cylinder | 1× | 1 | 4 | assembly |
| 7.2.1 | Cylinder Barrel | cbp-cyl-barrel | 1× | 1 | — | part |
| 7.2.2 | Cylinder Rod | cbp-cyl-rod | 1× | 1 | — | part |
| 7.2.3 | O-Ring Set | oring-set | 2× | 2 | — | part |
Used in 1 assembly
Sourcing — likely vendors
Companies that make this · indicative price $0.50–$100 · MOQ & lead are typical| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| 🇨🇳Foxconn foxconn.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |