Water Pump System Assembly
The lubrication loop: a centrifugal pump lifts filtered pool water to the start tub and spray nozzles, metered by valves and monitored by a flow switch that interlocks the ride open. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour product / assembly shared across products atomic part related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials
8 top-level lines · 23 rows shown · 48 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Circulation Pump 8 parts | water-slide-circulation-pump | 1× | 1 | 29 | assembly |
| 1.1 | Motor Housing | motor-housing | 1× | 1 | — | part |
| 1.2 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 1.2.1 | Stator Core (laminations) | stator-core | 1× | 1 | — | part |
| 1.2.2 | Copper Winding | copper-winding | 1× | 1 | — | part |
| 1.2.3 | Slot Insulation | stator-insulation | 1× | 1 | — | part |
| 1.3 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 1.3.1 | Rotor Shaft | rotor-shaft | 1× | 1 | — | part |
| 1.3.2 | Rotor Core | rotor-core | 1× | 1 | — | part |
| 1.3.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | — | part |
| 1.3.4 | Ball Bearing | ball-bearing | 1× | 1 | — | part |
| 1.4 | Pump Impeller | water-slide-pump-impeller | 1× | 1 | — | part |
| 1.5 | Pump Volute | water-slide-pump-volute | 1× | 1 | — | part |
| 1.6 | Ball Bearing | ball-bearing | 2× | 2 | — | part |
| 1.7 | Oil Seal | oil-seal | 1× | 1 | — | part |
| 1.8 | O-Ring Set | oring-set | 1× | 1 | — | part |
| 2 | Riser Pipe | water-slide-riser-pipe | 1× | 1 | — | part |
| 3 | Start Tub Feed | water-slide-start-tub | 1× | 1 | — | part |
| 4 | Spray Nozzle | water-slide-spray-nozzle | 10× | 10 | — | part |
| 5 | Balance Valve | water-slide-balance-valve | 4× | 4 | — | part |
| 6 | Flow Switch | water-slide-flow-switch | 1× | 1 | — | part |
| 7 | Suction Strainer | water-slide-strainer | 1× | 1 | — | part |
| 8 | Pressure Sensor | pressure-sensor | 1× | 1 | — | part |
Used in 1 assembly
Sourcing — likely vendors
Companies that make this · indicative price $5–$2k · MOQ & lead are typical| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| kbl.co.in ↗ | Pune, IN | Pumps & fluid systems | 200 units | 6–10 wks |
| leo.com.cn ↗ | Taizhou, CN | Pumps | 200 units | 6–10 wks |
| shaktipumps.com ↗ | Pithampur, IN | Pumps | 200 units | 6–10 wks |
| cnppumps.com ↗ | Hangzhou, CN | Pumps | 200 units | 6–10 wks |
| rotopumps.com ↗ | Noida, IN | Pumps | 200 units | 6–10 wks |