Dielectric System Assembly
Conditions, deionizes, chills and pumps the deionized-water dielectric. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour product / assembly shared across products atomic part related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials
7 top-level lines · 23 rows shown · 63 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Deionized Water Tank | wire-edm-water-tank | 1× | 1 | — | part |
| 2 | Dielectric Pump 5 parts | wire-edm-dielectric-pump | 2× | 2 | 25 | assembly |
| 2.1 | Stator Assembly 3 parts | stator-assembly | 1× | 2 | 3 | assembly |
| 2.1.1 | Stator Core (laminations) | stator-core | 1× | 2 | — | part |
| 2.1.2 | Copper Winding | copper-winding | 1× | 2 | — | part |
| 2.1.3 | Slot Insulation | stator-insulation | 1× | 2 | — | part |
| 2.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 2 | 19 | assembly |
| 2.2.1 | Rotor Shaft | rotor-shaft | 1× | 2 | — | part |
| 2.2.2 | Rotor Core | rotor-core | 1× | 2 | — | part |
| 2.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 32 | — | part |
| 2.2.4 | Ball Bearing | ball-bearing | 1× | 2 | — | part |
| 2.3 | Motor Housing | motor-housing | 1× | 2 | — | part |
| 2.4 | Pump Impeller | wire-edm-impeller | 1× | 2 | — | part |
| 2.5 | O-Ring Set | oring-set | 1× | 2 | — | part |
| 3 | Paper Cartridge Filter | wire-edm-paper-filter | 2× | 2 | — | part |
| 4 | Ion-Exchange Resin Deionizer | wire-edm-resin-deionizer | 1× | 1 | — | part |
| 5 | Dielectric Chiller 4 parts | wire-edm-chiller | 1× | 1 | 4 | assembly |
| 5.1 | Refrigeration Compressor | wire-edm-compressor | 1× | 1 | — | part |
| 5.2 | Condenser Coil | wire-edm-condenser | 1× | 1 | — | part |
| 5.3 | Plate Heat Exchanger | wire-edm-heat-exchanger | 1× | 1 | — | part |
| 5.4 | Flow Control Valve | wire-edm-flow-valve | 1× | 1 | — | part |
| 6 | Flow Control Valve | wire-edm-flow-valve | 4× | 4 | — | part |
| 7 | Conductivity Sensor | wire-edm-conductivity-sensor | 1× | 1 | — | part |
Used in 1 assembly
Sourcing — likely vendors
Companies that make this · indicative price $0.50–$100 · MOQ & lead are typical| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| 🇨🇳Foxconn foxconn.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |