Programmable Furnace Assembly
A wound heating element raises the sample temperature on a programmed ramp; a thermocouple and PID controller hold the setpoint, and insulation plus the furnace tube contain the heat around the sample. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour product / assembly shared across products atomic part related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials
6 top-level lines · 21 rows shown · 104 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Heating Element | heating-element | 1× | 1 | — | part |
| 2 | Furnace Tube | tga-furnace-tube | 1× | 1 | — | part |
| 3 | Furnace Thermocouple | tga-thermocouple | 1× | 1 | — | part |
| 4 | Furnace Insulation | tga-furnace-insulation | 1× | 1 | — | part |
| 5 | Temperature Controller 5 parts | tga-temperature-controller | 1× | 1 | 77 | assembly |
| 5.1 | Bare PCB | pcb-bare | 1× | 1 | — | part |
| 5.2 | Microcontroller | mcu | 1× | 1 | — | part |
| 5.3 | Relay | relay | 1× | 1 | — | part |
| 5.4 | SMD Passive (R/C/L) | smd-passives | 70× | 70 | — | part |
| 5.5 | Connector | connector | 4× | 4 | — | part |
| 6 | Furnace Lift 3 parts | tga-furnace-lift | 1× | 1 | 23 | assembly |
| 6.1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 6.1.1 | Stator Core (laminations) | stator-core | 1× | 1 | — | part |
| 6.1.2 | Copper Winding | copper-winding | 1× | 1 | — | part |
| 6.1.3 | Slot Insulation | stator-insulation | 1× | 1 | — | part |
| 6.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 6.2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | — | part |
| 6.2.2 | Rotor Core | rotor-core | 1× | 1 | — | part |
| 6.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | — | part |
| 6.2.4 | Ball Bearing | ball-bearing | 1× | 1 | — | part |
| 6.3 | Ball Screw | ball-screw | 1× | 1 | — | part |
Used in 1 assembly
Sourcing — likely vendors
Companies that make this · indicative price $0.50–$100 · MOQ & lead are typical| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| 🇨🇳Foxconn foxconn.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |