Intensifier Pump Assembly
A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour product / assembly shared across products atomic part related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials
8 top-level lines · 27 rows shown · 49 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Hydraulic Power Unit Motor 5 parts | waterjet-cutter-hpu-motor | 1× | 1 | 26 | assembly |
| 1.1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 1.1.1 | Stator Core (laminations) | stator-core | 1× | 1 | — | part |
| 1.1.2 | Copper Winding | copper-winding | 1× | 1 | — | part |
| 1.1.3 | Slot Insulation | stator-insulation | 1× | 1 | — | part |
| 1.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 1.2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | — | part |
| 1.2.2 | Rotor Core | rotor-core | 1× | 1 | — | part |
| 1.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | — | part |
| 1.2.4 | Ball Bearing | ball-bearing | 1× | 1 | — | part |
| 1.3 | Copper Winding | copper-winding | 1× | 1 | — | part |
| 1.4 | Motor Housing | motor-housing | 1× | 1 | — | part |
| 1.5 | Ball Bearing | ball-bearing | 2× | 2 | — | part |
| 2 | Hydraulic Axial Piston Pump 3 parts | waterjet-cutter-hyd-pump | 1× | 1 | 4 | assembly |
| 2.1 | Pump Piston Set | waterjet-cutter-piston-set | 1× | 1 | — | part |
| 2.2 | Swashplate | waterjet-cutter-swashplate | 1× | 1 | — | part |
| 2.3 | Oil Seal | oil-seal | 2× | 2 | — | part |
| 3 | Pressure Intensifier 4 parts | waterjet-cutter-intensifier | 1× | 1 | 8 | assembly |
| 3.1 | Intensifier Piston | waterjet-cutter-intensifier-piston | 1× | 1 | — | part |
| 3.2 | High-Pressure Cylinder | waterjet-cutter-hp-cylinder | 2× | 2 | — | part |
| 3.3 | High-Pressure Dynamic Seal | waterjet-cutter-hp-seal | 4× | 4 | — | part |
| 3.4 | O-Ring Set | oring-set | 1× | 1 | — | part |
| 4 | Inlet/Outlet Check Valve | waterjet-cutter-check-valve | 4× | 4 | — | part |
| 5 | Pulsation Attenuator | waterjet-cutter-attenuator | 1× | 1 | — | part |
| 6 | Hydraulic Reservoir | waterjet-cutter-hyd-tank | 1× | 1 | — | part |
| 7 | Oil Seal | oil-seal | 4× | 4 | — | part |
| 8 | O-Ring Set | oring-set | 1× | 1 | — | part |
Used in 1 assembly
Sourcing — likely vendors
Companies that make this · indicative price $5–$2k · MOQ & lead are typical| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| kbl.co.in ↗ | Pune, IN | Pumps & fluid systems | 200 units | 6–10 wks |
| leo.com.cn ↗ | Taizhou, CN | Pumps | 200 units | 6–10 wks |
| shaktipumps.com ↗ | Pithampur, IN | Pumps | 200 units | 6–10 wks |
| cnppumps.com ↗ | Hangzhou, CN | Pumps | 200 units | 6–10 wks |
| rotopumps.com ↗ | Noida, IN | Pumps | 200 units | 6–10 wks |