BOMwiki the bill-of-materials encyclopedia
30,454,201 parts mapped · 193,225 items

Change #59

Accepted by sd on 2026-10-19 14:27. It is live on the pages below; each page's History tab shows the resulting revision.

Change #59 · Add High Altitude Spraying Machine: a truck-mounted 30 m class tall-tree cannon sprayer, 63 pages in six groups. AI-assisted, from maker data sheets and a field study checked on 2026-10-19. Batch catalog-create-high-altitude-sprayer-2026-10-19; reviewed 2026-10-19. New pages only. accepted

by sd · 2026-10-19 14:27 · 63 nodes

New: High Altitude Spraying Machine high-altitude-spraying-machine

  • Created High Altitude Spraying Machine (product): "A truck-mounted air-blast sprayer whose fan blows a fast jet of air through a turning, tilting cannon, carrying pesticide mist about 30 m up into tall trees. Parts of a 30 m class skid unit with its own diesel engine, in six groups."
  • Added high-altitude-sprayer-cannon × 1
  • Added high-altitude-sprayer-turret × 1
  • Added high-altitude-sprayer-liquid-system × 1
  • Added high-altitude-sprayer-power × 1
  • Added high-altitude-sprayer-control × 1
  • Added high-altitude-sprayer-frame × 1

New: Double-Intake Centrifugal Fan Impeller high-altitude-sprayer-fan-impeller

  • Created Double-Intake Centrifugal Fan Impeller (part): "A centrifugal impeller of about 450 to 500 mm with around 40 blades that draws air in from both sides and throws it out at the rim. It turns at roughly 2,200 to 2,750 rpm and makes the high air speed the cannon needs to carry spray to the tops of tall trees."

New: Fan Volute Housing high-altitude-sprayer-fan-housing

  • Created Fan Volute Housing (part): "The spiral casing around the impeller, with an intake on each side behind guard mesh. It collects the air leaving the impeller and turns it into the cannon tube."

New: Fan Centrifugal Clutch high-altitude-sprayer-fan-clutch

  • Created Fan Centrifugal Clutch (part): "Engages the fan drive automatically once the engine is above idle and frees it when the engine slows, so the engine can start without turning the heavy impeller and the fan can run down on its own after shutdown."

New: Cannon Tube high-altitude-sprayer-cannon-tube

  • Created Cannon Tube (part): "The air duct from the fan outlet to the cannon head. It is mounted on the slewing turret and tilts with the head, guiding the air stream in one tight jet instead of spreading it like a fan sprayer."

New: Cannon Head high-altitude-sprayer-cannon-head

  • Created Cannon Head (part): "The outlet cone at the end of the cannon tube that sets the final air speed, about 60 to 80 m/s, and carries the nozzle ring around its mouth so the liquid is released straight into the fastest air."

New: Nozzle Body with Anti-Drip Valve high-altitude-sprayer-nozzle-body

  • Created Nozzle Body with Anti-Drip Valve (part): "A brass or plastic nozzle holder on the nozzle ring with a spring-loaded diaphragm check valve. The valve closes as soon as line pressure drops, so nozzles stop dripping when spraying stops or the cannon turns."

New: Ceramic Hollow-Cone Nozzle Tip high-altitude-sprayer-nozzle-tip

  • Created Ceramic Hollow-Cone Nozzle Tip (part): "An ISO color-coded hollow-cone tip with a ceramic orifice that breaks the liquid into a cone of fine droplets. Tip size and pressure set the flow, and ceramic keeps the flow rate from creeping up as the tip wears."

New: Nozzle Strainer high-altitude-sprayer-nozzle-strainer

  • Created Nozzle Strainer (part): "A small mesh strainer behind each tip that stops particles left by the line filter from blocking the orifice."

New: Nozzle Ring high-altitude-sprayer-nozzle-ring

  • Created Nozzle Ring (assembly): "8 nozzles arranged around the mouth of the cannon head, split into an upper and a lower section that can be switched separately. The air jet breaks the droplets further and carries them up into the canopy."
  • Added high-altitude-sprayer-nozzle-body × 8
  • Added high-altitude-sprayer-nozzle-tip × 8
  • Added high-altitude-sprayer-nozzle-strainer × 8

New: Electrostatic Charging Kit high-altitude-sprayer-electrostatic-kit

  • Created Electrostatic Charging Kit (part): "Electrodes at the air outlet fed by a high-voltage generator of about 20 to 30 kV. They charge the droplets so they are drawn onto leaf surfaces, including the undersides, instead of drifting past."

New: Fan and Cannon high-altitude-sprayer-cannon

  • Created Fan and Cannon (assembly): "A double-intake centrifugal fan blows a jet of air through a cannon tube and head at 60 to 80 m/s. Liquid from the nozzle ring at the head is carried up to about 30 m into tall trees, or about 40 to 60 m sideways along a tree line."
  • Added high-altitude-sprayer-fan-impeller × 1
  • Added high-altitude-sprayer-fan-housing × 1
  • Added Helical Gearbox × 1
  • Added high-altitude-sprayer-fan-clutch × 1
  • Added high-altitude-sprayer-cannon-tube × 1
  • Added high-altitude-sprayer-cannon-head × 1
  • Added high-altitude-sprayer-nozzle-ring × 1
  • Added high-altitude-sprayer-electrostatic-kit × 1

New: Turret Frame high-altitude-sprayer-turret-frame

  • Created Turret Frame (part): "The steel tower on the slewing ring that carries the fan, cannon tube and head and holds the pivot the cannon tilts on."

New: Slewing Ring high-altitude-sprayer-slewing-ring

  • Created Slewing Ring (part): "A large ball slewing bearing with gear teeth cut on one ring, between the skid frame and the turret. It carries the weight and wind load of the cannon while letting it turn."

New: Slew Hydraulic Motor high-altitude-sprayer-slew-motor

  • Created Slew Hydraulic Motor (part): "A small hydraulic motor that drives the slew pinion through a worm reducer, turning the turret about 220 degrees from side to side."

New: Slew Pinion high-altitude-sprayer-slew-pinion

  • Created Slew Pinion (part): "The output gear of the slew reducer that meshes with the teeth on the slewing ring."

New: Cannon Tilt Cylinder high-altitude-sprayer-tilt-cylinder

  • Created Cannon Tilt Cylinder (part): "A double-acting hydraulic cylinder between the turret and the cannon tube that tilts the cannon from near horizontal to about 80 degrees up, so the jet can be aimed into the crown of each tree."

New: Sweep Limit Switch high-altitude-sprayer-sweep-limit-switch

  • Created Sweep Limit Switch (part): "Adjustable switches on the turret that mark the ends of the slew and tilt range. The controller reverses the cannon at each switch to sweep a set sector automatically."

New: Slewing and Elevation high-altitude-sprayer-turret

  • Created Slewing and Elevation (assembly): "The turret that aims the cannon. A hydraulic motor turns it on a slewing ring about 220 degrees from side to side, and a hydraulic cylinder tilts the cannon up to about 80 degrees, both controlled from the cab or the wireless remote."
  • Added high-altitude-sprayer-turret-frame × 1
  • Added high-altitude-sprayer-slewing-ring × 1
  • Added high-altitude-sprayer-slew-motor × 1
  • Added Worm Gear Reducer × 1
  • Added high-altitude-sprayer-slew-pinion × 1
  • Added high-altitude-sprayer-tilt-cylinder × 1
  • Added high-altitude-sprayer-sweep-limit-switch × 4

New: Main Spray Tank high-altitude-sprayer-main-tank

  • Created Main Spray Tank (part): "A 2,000 L rotomolded polyethylene tank with internal baffles that stop the load surging when the truck brakes or turns, a sloped sump that drains to the pump suction, and a large fill lid with a basket strainer."

New: Rinse Tank high-altitude-sprayer-rinse-tank

  • Created Rinse Tank (part): "A separate clean-water tank of about 100 L used to rinse the pump, lines and nozzles and dilute what is left in the main tank at the end of the job, before the sprayer leaves the treated area."

New: Hand-Wash Tank high-altitude-sprayer-hand-wash-tank

  • Created Hand-Wash Tank (part): "A small clean-water tank of about 15 L with a tap at the side of the machine, for the operator to wash hands and skin after handling chemicals."

New: Chemical Induction Hopper high-altitude-sprayer-induction-hopper

  • Created Chemical Induction Hopper (part): "A hopper at working height on the side of the skid where the operator pours in chemical, which is drawn into the main tank by suction, with a rinse nozzle to clean empty containers. The operator does not need to climb onto the tank to fill it."

New: Hydraulic Tank Agitator high-altitude-sprayer-agitator

  • Created Hydraulic Tank Agitator (part): "Jet nozzles near the tank floor fed with part of the pump flow. They keep the spray mix stirred so wettable powders and emulsions do not settle out."

New: Tank Level Indicator high-altitude-sprayer-level-indicator

  • Created Tank Level Indicator (part): "A float gauge on the main tank that shows the remaining volume where the operator can read it."

New: Suction Filter high-altitude-sprayer-suction-filter

  • Created Suction Filter (part): "A filter with a removable mesh cartridge and shutoff valve between the tank and the pump, so the pump draws only clean liquid and the cartridge can be cleaned with the tank full."

New: Pump Crankcase high-altitude-sprayer-pump-crankcase

  • Created Pump Crankcase (part): "The pump body with its crankshaft, connecting rods and pistons running in oil, driven from the engine."

New: Pump Diaphragm high-altitude-sprayer-pump-diaphragm

  • Created Pump Diaphragm (part): "A rubber diaphragm between each piston and the spray liquid, so the liquid never touches the oiled piston and crank. It is the part that wears and is replaced in service."

New: Pump Valve Set high-altitude-sprayer-pump-valves

  • Created Pump Valve Set (part): "Suction and delivery check valves for each pump chamber that let the liquid move in one direction only."

New: Pump Pressure Accumulator high-altitude-sprayer-pump-air-chamber

  • Created Pump Pressure Accumulator (part): "An air-charged dome on the pump outlet that smooths out the pulses from the pistons, so nozzle pressure and flow stay steady."

New: Piston-Diaphragm Pump high-altitude-sprayer-spray-pump

  • Created Piston-Diaphragm Pump (assembly): "The spray pump: pistons in an oil bath push on rubber diaphragms that move the liquid. It delivers about 140 L/min at up to 50 bar, enough to feed the nozzles and the tank agitator at once, and tolerates abrasive and corrosive mixes."
  • Added high-altitude-sprayer-pump-crankcase × 1
  • Added high-altitude-sprayer-pump-diaphragm × 4
  • Added high-altitude-sprayer-pump-valves × 1
  • Added high-altitude-sprayer-pump-air-chamber × 1

New: Pressure Regulator high-altitude-sprayer-pressure-regulator

  • Created Pressure Regulator (part): "An electrically adjusted valve that holds spraying pressure at the set value and sends surplus flow back to the tank. Changing pressure changes the nozzle flow and droplet size."

New: Pressure Gauge high-altitude-sprayer-pressure-gauge

  • Created Pressure Gauge (part): "A glycerin-filled gauge on the control unit that shows spraying pressure, scaled finely enough in the working range to set the flow accurately."

New: Pressure Line Filter high-altitude-sprayer-line-filter

  • Created Pressure Line Filter (part): "A filter on the pressure side between the pump and the section valves that catches what the suction filter lets through, before it reaches the nozzle strainers."

New: Electric Section Valve high-altitude-sprayer-section-valve

  • Created Electric Section Valve (part): "A motorized valve that switches one section of the nozzle ring, the upper or the lower half, on or off from the cab."

New: Flow Meter high-altitude-sprayer-flow-meter

  • Created Flow Meter (part): "A turbine or electromagnetic meter in the delivery line that measures the liquid going to the nozzles, so the controller can show the rate applied and hold it as speed changes."

New: Spray Hoses and Fittings high-altitude-sprayer-spray-hoses

  • Created Spray Hoses and Fittings (part): "Chemical-resistant suction and pressure hoses, couplings and clamps linking the tanks, pump, control unit and nozzle ring, with a loop that lets the line follow the turret as it slews."

New: Hose Reel and Spray Gun high-altitude-sprayer-hose-reel-gun

  • Created Hose Reel and Spray Gun (part): "A hose reel on the skid with a hand spray gun, for spot treatment of single trees, trunks or hedges the cannon would overspray."

New: Tanks and Liquid System high-altitude-sprayer-liquid-system

  • Created Tanks and Liquid System (assembly): "Carries the spray mix and delivers it to the nozzles. The pump draws from the main tank through the suction filter and pushes the liquid through the pressure regulator, line filter and section valves to the nozzle ring, with part of the flow returned to stir the tank. Separate tanks hold clean water for rinsing the system and washing hands."
  • Added high-altitude-sprayer-main-tank × 1
  • Added high-altitude-sprayer-rinse-tank × 1
  • Added high-altitude-sprayer-hand-wash-tank × 1
  • Added high-altitude-sprayer-induction-hopper × 1
  • Added high-altitude-sprayer-agitator × 1
  • Added high-altitude-sprayer-level-indicator × 1
  • Added high-altitude-sprayer-suction-filter × 1
  • Added high-altitude-sprayer-spray-pump × 1
  • Added high-altitude-sprayer-pressure-regulator × 1
  • Added high-altitude-sprayer-pressure-gauge × 1
  • Added high-altitude-sprayer-line-filter × 1
  • Added Ball Valve × 1
  • Added high-altitude-sprayer-section-valve × 2
  • Added high-altitude-sprayer-flow-meter × 1
  • Added high-altitude-sprayer-spray-hoses × 1
  • Added high-altitude-sprayer-hose-reel-gun × 1

New: Auxiliary Diesel Engine high-altitude-sprayer-diesel-engine

  • Created Auxiliary Diesel Engine (part): "A water-cooled four-cylinder diesel engine of about 55 to 66 kW mounted on the skid. It drives the fan, the spray pump and the hydraulic pump, so the truck engine only has to move the vehicle and spraying power does not depend on road speed."

New: Engine Fuel Tank high-altitude-sprayer-fuel-tank

  • Created Engine Fuel Tank (part): "A diesel tank on the skid sized for a full working shift."

New: Engine Air Cleaner high-altitude-sprayer-air-cleaner

  • Created Engine Air Cleaner (part): "A dry two-stage air filter for the engine intake, placed away from the spray cloud and dust."

New: Exhaust Silencer high-altitude-sprayer-exhaust-silencer

  • Created Exhaust Silencer (part): "Muffler and tailpipe that route engine exhaust up and away from the fan intakes and the operator."

New: Engine Unit high-altitude-sprayer-engine

  • Created Engine Unit (assembly): "The skid-mounted diesel engine with its cooling, fuel, intake and exhaust systems and starting battery."
  • Added high-altitude-sprayer-diesel-engine × 1
  • Added Radiator × 1
  • Added high-altitude-sprayer-fuel-tank × 1
  • Added high-altitude-sprayer-air-cleaner × 1
  • Added high-altitude-sprayer-exhaust-silencer × 1
  • Added 12 V Battery × 1

New: Pump Belt Drive high-altitude-sprayer-pump-drive

  • Created Pump Belt Drive (part): "Pulleys and a V-belt set that drive the spray pump from the engine at its rated speed, with a tensioner and a full guard."

New: Hydraulic Gear Pump high-altitude-sprayer-hydraulic-pump

  • Created Hydraulic Gear Pump (part): "A small gear pump on the engine that supplies oil to the slew motor and tilt cylinder."

New: Hydraulic Oil Tank high-altitude-sprayer-hydraulic-tank

  • Created Hydraulic Oil Tank (part): "The reservoir for the slew and tilt circuit, with a return filter, breather and sight gauge."

New: Hydraulic Relief Valve high-altitude-sprayer-relief-valve

  • Created Hydraulic Relief Valve (part): "Limits the pressure in the slew and tilt circuit so a blocked cannon cannot overload the motor, cylinder or hoses."

New: Hydraulic Hoses high-altitude-sprayer-hydraulic-hoses

  • Created Hydraulic Hoses (part): "High-pressure hoses and fittings between the hydraulic pump, valves, slew motor and tilt cylinder."

New: Power and Drive high-altitude-sprayer-power

  • Created Power and Drive (assembly): "An auxiliary diesel engine on the skid drives the fan through a cardan shaft, the spray pump through a belt, and a hydraulic pump for the slew and tilt circuit. On tractor-mounted versions of this machine the tractor PTO takes the place of the engine."
  • Added high-altitude-sprayer-engine × 1
  • Added Industrial Cardan Shaft × 1
  • Added high-altitude-sprayer-pump-drive × 1
  • Added high-altitude-sprayer-hydraulic-pump × 1
  • Added high-altitude-sprayer-hydraulic-tank × 1
  • Added Directional Control Valve × 2
  • Added high-altitude-sprayer-relief-valve × 1
  • Added high-altitude-sprayer-hydraulic-hoses × 1

New: Cab Control Box high-altitude-sprayer-cab-control-box

  • Created Cab Control Box (part): "A control box mounted in the truck cab with switches for the engine, fan speed, main and section valves and spraying pressure, and a joystick for slewing and tilting the cannon, so the driver can spray while driving slowly along a tree line."

New: Wireless Remote Control high-altitude-sprayer-wireless-remote

  • Created Wireless Remote Control (part): "A handheld radio remote that repeats the cab controls, so an operator can stand clear of the spray cloud and aim the cannon at a single tree from a few hundred meters away."

New: Sprayer Controller high-altitude-sprayer-controller

  • Created Sprayer Controller (part): "An electronic control unit on the skid that switches the valves, drives the pressure regulator, runs the automatic sweep between the limit switches and stops spraying when the engine or fan stops."

New: Engine Instrument Panel high-altitude-sprayer-engine-panel

  • Created Engine Instrument Panel (part): "Gauges and warning lights for engine speed, oil pressure, coolant temperature and fuel, with key start and an emergency stop."

New: Wiring Harness high-altitude-sprayer-wiring-harness

  • Created Wiring Harness (part): "Sealed cables and connectors linking the cab box, controller, valves, limit switches, engine panel and lights, with a plug-in connection between truck and skid."

New: Work Lights and Beacon high-altitude-sprayer-work-lights

  • Created Work Lights and Beacon (part): "LED work lights for spraying at night, when air is often calmest, and an amber rotating beacon to warn traffic on roads and streets."

New: Controls and Lighting high-altitude-sprayer-control

  • Created Controls and Lighting (assembly): "The driver works the sprayer from a control box in the cab or a wireless remote. A controller on the skid switches the valves and runs the automatic sweep, and lights and a beacon make the machine visible at night and on roads."
  • Added high-altitude-sprayer-cab-control-box × 1
  • Added high-altitude-sprayer-wireless-remote × 1
  • Added high-altitude-sprayer-controller × 1
  • Added high-altitude-sprayer-engine-panel × 1
  • Added high-altitude-sprayer-wiring-harness × 1
  • Added high-altitude-sprayer-work-lights × 1

New: Skid Frame high-altitude-sprayer-skid-frame

  • Created Skid Frame (part): "A welded steel frame that carries the tanks, engine, pump and turret as one unit, so the whole sprayer can be lifted onto a truck bed and taken off again when the truck is needed for other work."

New: Truck Mounting Kit high-altitude-sprayer-truck-mounting-kit

  • Created Truck Mounting Kit (part): "Subframe rails, clamps and tie-down points that fix the skid to the truck chassis or bed, sized for the loaded weight of the sprayer."

New: Access Ladder and Platform high-altitude-sprayer-access-ladder

  • Created Access Ladder and Platform (part): "A fold-down ladder and railed platform for reaching the tank lid, engine and turret for inspection and service."

New: Fan Intake Guards high-altitude-sprayer-fan-guard

  • Created Fan Intake Guards (part): "Steel mesh guards over both fan intakes that keep hands, branches and leaves out of the impeller."

New: Drive Guards high-altitude-sprayer-drive-guards

  • Created Drive Guards (part): "Fixed covers over the cardan shaft, belt drive and other moving parts."

New: Skid Frame and Truck Mounting high-altitude-sprayer-frame

  • Created Skid Frame and Truck Mounting (assembly): "The frame that holds the sprayer together and mounts it on a truck, with the ladder, guards and fasteners."
  • Added high-altitude-sprayer-skid-frame × 1
  • Added high-altitude-sprayer-truck-mounting-kit × 1
  • Added high-altitude-sprayer-access-ladder × 1
  • Added high-altitude-sprayer-fan-guard × 2
  • Added high-altitude-sprayer-drive-guards × 1
  • Added Fastener Set × 1

Machine findings

  • Tanks and Liquid System: 16 direct children (dominant function: Convert energy), worth checking for integration or standardization
  • Power and Drive: 8 direct children (dominant function: Convert energy), worth checking for integration or standardization
  • Fan and Cannon: 8 direct children (dominant function: Manage heat), worth checking for integration or standardization
  • Slewing and Elevation: 7 direct children (dominant function: Guide motion), worth checking for integration or standardization
  • High Altitude Spraying Machine: 6 direct children (dominant function: Convert energy), worth checking for integration or standardization
  • Controls and Lighting: 6 direct children (dominant function: Manage heat), worth checking for integration or standardization
  • Engine Unit: 6 direct children (dominant function: Manage heat), worth checking for integration or standardization
  • High Altitude Spraying Machine functions after this change: Convert energy, Guide motion, Regulate flow
  • Double-Intake Centrifugal Fan Impeller functions after this change: Manage heat
  • Fan Volute Housing functions after this change: Filter or clean