Slewing and Elevation
AssemblyThe turret that aims the cannon. A hydraulic motor turns it on a slewing ring about 220 degrees from side to side, and a hydraulic cylinder tilts the cannon up to about 80 degrees, both controlled from the cab or the wireless remote. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Slewing and Elevation parts and their functions
7 top-level parts · 34 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Turret Frame | 1× | Carries the fan and cannon above the skid |
| 2 | Slewing Ring | 1× | Lets the turret turn while carrying its weight |
| 3 | Slew Hydraulic Motor | 1× | Turns the turret |
| 4 | Worm Gear Reducer 7 parts | 1× | Reduces slew motor speed and holds the turret still when the motor stops |
| 5 | Slew Pinion | 1× | Drives the slewing ring |
| 6 | Cannon Tilt Cylinder | 1× | Raises and lowers the cannon |
| 7 | Sweep Limit Switch | 4× | Set the ends of the automatic sweep. Two for slew, two for tilt |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Slewing and Elevation
7 top-level lines · 33 rows shown · 34 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Turret Frame | high-altitude-sprayer-turret-frame | 1× | 1 | · | part |
| 2 | Slewing Ring | high-altitude-sprayer-slewing-ring | 1× | 1 | · | part |
| 3 | Slew Hydraulic Motor | high-altitude-sprayer-slew-motor | 1× | 1 | · | part |
| 4 | Worm Gear Reducer 7 parts | worm-gear-reducer | 1× | 1 | 25 | product |
| 4.1 | Worm Reducer Housing 3 parts | worm-gear-reducer-housing | 1× | 1 | 3 | assembly |
| 4.1.1 | Housing Base Casting | worm-gear-reducer-base | 1× | 1 | · | part |
| 4.1.2 | Top Cover Plate | worm-gear-reducer-top-cover | 1× | 1 | · | part |
| 4.1.3 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 4.2 | Worm Shaft Assembly 2 parts | worm-gear-reducer-worm-shaft-assembly | 1× | 1 | 3 | assembly |
| 4.2.1 | Worm Screw | worm-gear-reducer-worm | 1× | 1 | · | part |
| 4.2.2 | Worm Bearing | worm-gear-reducer-worm-bearing | 2× | 2 | · | part |
| 4.3 | Worm Wheel Assembly 3 parts | worm-gear-reducer-wheel-assembly | 1× | 1 | 3 | assembly |
| 4.3.1 | Bronze Worm Wheel | worm-gear-reducer-wheel | 1× | 1 | · | part |
| 4.3.2 | Wheel Output Shaft | worm-gear-reducer-wheel-shaft | 1× | 1 | · | part |
| 4.3.3 | Wheel Hub | worm-gear-reducer-wheel-hub | 1× | 1 | · | part |
| 4.4 | Bearing Cartridge 3 parts | worm-gear-reducer-bearing-cartridge | 1× | 1 | 7 | assembly |
| 4.4.1 | Ball Bearing | ball-bearing | 4× | 4 | · | part |
| 4.4.2 | Bearing Spacer | worm-gear-reducer-bearing-spacer | 2× | 2 | · | part |
| 4.4.3 | Preload Element | worm-gear-reducer-preload-element | 1× | 1 | · | part |
| 4.5 | Seal Kit Assembly 3 parts | worm-gear-reducer-seal-kit | 1× | 1 | 4 | assembly |
| 4.5.1 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 4.5.2 | Cover Gasket | worm-gear-reducer-gasket | 1× | 1 | · | part |
| 4.5.3 | O-Ring Set | oring-set | 1× | 1 | · | part |
| 4.6 | Lubrication System 3 parts | worm-gear-reducer-lube-system | 1× | 1 | 3 | assembly |
| 4.6.1 | Sump Cavity | worm-gear-reducer-sump-cavity | 1× | 1 | · | part |
| 4.6.2 | Oil Level Plug | worm-gear-reducer-oil-level-plug | 1× | 1 | · | part |
| 4.6.3 | Temp Sensor Port | worm-gear-reducer-temperature-sensor-boss | 1× | 1 | · | part |
| 4.7 | Drain and Fill Assembly 2 parts | worm-gear-reducer-drain-fill | 1× | 1 | 2 | assembly |
| 4.7.1 | Drain Plug | worm-gear-reducer-drain-plug | 1× | 1 | · | part |
| 4.7.2 | Fill Plug and Breather | worm-gear-reducer-fill-plug | 1× | 1 | · | part |
| 5 | Slew Pinion | high-altitude-sprayer-slew-pinion | 1× | 1 | · | part |
| 6 | Cannon Tilt Cylinder | high-altitude-sprayer-tilt-cylinder | 1× | 1 | · | part |
| 7 | Sweep Limit Switch | high-altitude-sprayer-sweep-limit-switch | 4× | 4 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the slewing and elevation is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$200. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| bharatforge.com ↗ | Pune, IN | Forgings & metal parts | 500 pcs | 6–10 wks |
| dicastal.com ↗ | Qinhuangdao, CN | Aluminium castings & wheels | 500 pcs | 6–10 wks |
| tataautocomp.com ↗ | Pune, IN | Auto components | 500 pcs | 6–10 wks |
|
🇸🇬Beyonics
beyonics.com ↗
|
Singapore | Precision metal & mfg | 500 pcs | 6–10 wks |
| sundaram-clayton.com ↗ | Chennai, IN | Die castings | 500 pcs | 6–10 wks |