Motor Body Assembly
Ergonomic hand unit holding the motor, speed trigger and control board, with a coupling that drives whichever attachment is fitted. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour product / assembly shared across products atomic part related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials
7 top-level lines · 27 rows shown · 42 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Grip Housing | immersion-blender-grip-housing | 1× | 1 | — | part |
| 2 | Brushed DC Motor 7 parts | immersion-blender-motor | 1× | 1 | 30 | assembly |
| 2.1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 2.1.1 | Stator Core (laminations) | stator-core | 1× | 1 | — | part |
| 2.1.2 | Copper Winding | copper-winding | 1× | 1 | — | part |
| 2.1.3 | Slot Insulation | stator-insulation | 1× | 1 | — | part |
| 2.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 2.2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | — | part |
| 2.2.2 | Rotor Core | rotor-core | 1× | 1 | — | part |
| 2.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | — | part |
| 2.2.4 | Ball Bearing | ball-bearing | 1× | 1 | — | part |
| 2.3 | Copper Winding | copper-winding | 2× | 2 | — | part |
| 2.4 | Motor Housing | motor-housing | 1× | 1 | — | part |
| 2.5 | Carbon Brush | immersion-blender-carbon-brush | 2× | 2 | — | part |
| 2.6 | Cooling Fan | immersion-blender-cooling-fan | 1× | 1 | — | part |
| 2.7 | Ball Bearing | ball-bearing | 2× | 2 | — | part |
| 3 | Control Board 6 parts | immersion-blender-control-board | 1× | 1 | 7 | assembly |
| 3.1 | Bare PCB | pcb-bare | 1× | 1 | — | part |
| 3.2 | Microcontroller | mcu | 1× | 1 | — | part |
| 3.3 | Speed Potentiometer | immersion-blender-speed-potentiometer | 1× | 1 | — | part |
| 3.4 | Speed Control Triac | immersion-blender-triac | 1× | 1 | — | part |
| 3.5 | Suppression Choke | immersion-blender-suppression-choke | 1× | 1 | — | part |
| 3.6 | Connector | connector | 2× | 2 | — | part |
| 4 | Speed Trigger | immersion-blender-speed-trigger | 1× | 1 | — | part |
| 5 | Button Set | immersion-blender-button-set | 1× | 1 | — | part |
| 6 | Output Coupling | immersion-blender-output-coupling | 1× | 1 | — | part |
| 7 | Fastener Set | fastener-set | 1× | 1 | — | part |
Used in 1 assembly
Sourcing — likely vendors
Companies that make this · indicative price $2–$500 · MOQ & lead are typical| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| 🇨🇳Inovance inovance.com ↗ | Shenzhen, CN | Drives & motion control | 500 units | 10–14 wks |
| sonacomstar.com ↗ | Gurugram, IN | EV driveline & motors | 500 units | 10–14 wks |
| broad-ocean.com ↗ | Zhongshan, CN | Electric motors | 500 units | 10–14 wks |
| nidec.com ↗ | Singapore | Motors — regional ops | 500 units | 10–14 wks |
| bosch.in ↗ | Bengaluru, IN | Automotive components | 500 units | 10–14 wks |