Change #58
Accepted by sd on 2026-10-19 14:24. It is live on the pages below; each page's History tab shows the resulting revision.
Change #58 · Add Main Beam Tunnel Boring Machine: a 7 m class hard-rock gripper TBM and its backup, 132 pages in nine groups. AI-assisted, from maker pages and technical papers checked on 2026-10-19. Batch catalog-create-main-beam-tbm-2026-10-19; reviewed 2026-10-19. New pages only. accepted
New: Main Beam Tunnel Boring Machine main-beam-tbm
- Created Main Beam Tunnel Boring Machine (product): "An open hard-rock tunnel boring machine that clamps itself to the tunnel walls with gripper shoes and thrusts a rotating cutterhead of disc cutters into the rock face, installing rock support directly behind it. Parts of a 7 m class machine and its backup, in nine groups."
- Added main-beam-tbm-cutterhead × 1
- Added main-beam-tbm-main-drive × 1
- Added main-beam-tbm-gripper-thrust × 1
- Added main-beam-tbm-ground-support × 1
- Added main-beam-tbm-muck-handling × 1
- Added main-beam-tbm-hydraulics × 1
- Added main-beam-tbm-electrical × 1
- Added main-beam-tbm-control × 1
- Added main-beam-tbm-backup × 1
New: Cutterhead Structure main-beam-tbm-cutterhead-structure
- Created Cutterhead Structure (part): "The welded steel body of the cutterhead, built from thick plate as a center piece and outer segments so it can be transported and assembled at the portal or underground. It carries the cutter housings, buckets and wear plates and bolts to the rotating ring of the main bearing."
New: Disc Cutter Ring main-beam-tbm-cutter-ring
- Created Disc Cutter Ring (part): "The rolling cutting edge of a 19-inch (483 mm) disc cutter: a closed-die forged, heat-treated tool-steel ring with a narrow, flat tip. It is shrink-fitted onto the cutter hub and is replaced when worn or chipped, while the hub, shaft and bearings are rebuilt and reused."
New: Disc Cutter Hub main-beam-tbm-cutter-hub
- Created Disc Cutter Hub (part): "The steel wheel that carries the cutter ring on its induction-hardened outer seat and the two bearing cups in its bore, and turns around the fixed cutter shaft."
New: Disc Cutter Shaft main-beam-tbm-cutter-shaft
- Created Disc Cutter Shaft (part): "The fixed shaft through the cutter hub. It carries the bearing cones, and its ends are clamped into the cutter housing by wedges so the shaft cannot turn."
New: Disc Cutter Tapered Roller Bearing main-beam-tbm-cutter-bearing
- Created Disc Cutter Tapered Roller Bearing (part): "One of two carburized tapered roller bearings mounted in opposition inside the cutter hub. Together they carry the heavy radial load of rolling on the rock and the side load at the gauge, and they are preloaded at assembly."
New: Disc Cutter Metal Face Seal main-beam-tbm-cutter-seal
- Created Disc Cutter Metal Face Seal (part): "A pair of hardened steel seal rings whose lapped faces run against each other, each pressed into place by a silicone toric ring. It keeps the lubricant in and rock flour and water out, which decides how long the bearings last."
New: Disc Cutter End Cap main-beam-tbm-cutter-end-cap
- Created Disc Cutter End Cap (part): "A retainer at each end of the cutter shaft that holds the bearings, sets their preload and carries one half of the metal face seal."
New: Cutter Ring Retainer main-beam-tbm-cutter-ring-retainer
- Created Cutter Ring Retainer (part): "A retention ring welded to the hub beside the shrink-fitted cutter ring, so side loads at the gauge cannot walk the ring off the hub."
New: 19-inch Disc Cutter main-beam-tbm-disc-cutter
- Created 19-inch Disc Cutter (assembly): "A back-loading single-disc cutter with a 483 mm (19 in) ring. The ring rolls on the rock face under a load of up to 311 kN and crushes it under the tip, and the cracks spreading between neighboring tracks break off chips. It is sealed, filled with lubricant and changed as one unit from inside the cutterhead."
- Added main-beam-tbm-cutter-ring × 1
- Added main-beam-tbm-cutter-hub × 1
- Added main-beam-tbm-cutter-shaft × 1
- Added main-beam-tbm-cutter-bearing × 2
- Added main-beam-tbm-cutter-seal × 2
- Added main-beam-tbm-cutter-end-cap × 2
- Added main-beam-tbm-cutter-ring-retainer × 1
New: 17-inch Center Cutter main-beam-tbm-center-cutter
- Created 17-inch Center Cutter (part): "A smaller 432 mm (17 in) disc cutter used at the center of the cutterhead, where the cutting tracks are closest together and there is no room for 19-inch housings. Its rated load is 267 kN."
New: Cutter Housing main-beam-tbm-cutter-housing
- Created Cutter Housing (part): "A pocket built into the cutterhead that holds one cutter at its set position and spacing. On a back-loading cutterhead the cutter is pulled rearward into the cutterhead, so crews change cutters behind the face. Older and smaller heads load cutters from the front."
New: Cutter Wedge Lock main-beam-tbm-cutter-wedge-lock
- Created Cutter Wedge Lock (part): "Wedges and bolts that clamp the ends of the cutter shaft into the housing. The wedges give line contact along the shaft and keep the cutting load off the bolts; loosening them frees the cutter for a change."
New: Muck Bucket main-beam-tbm-muck-bucket
- Created Muck Bucket (part): "An opening at the rim of the cutterhead that scoops broken rock off the tunnel floor as the head turns. The rock is carried up inside the cutterhead and slides off toward the center into the muck chute."
New: Bucket Lip main-beam-tbm-bucket-lip
- Created Bucket Lip (part): "A replaceable hardened steel lip with teeth on the leading edge of each bucket. It scrapes the floor clean and takes the wear instead of the bucket."
New: Bucket Grill Bars main-beam-tbm-bucket-grill-bars
- Created Bucket Grill Bars (part): "Bars across each bucket opening that keep out blocks too large for the conveyor. Large blocks stay on the floor until the cutters break them down."
New: Cutterhead Wear Plates main-beam-tbm-wear-plates
- Created Cutterhead Wear Plates (part): "Abrasion-resistant plates and hardfacing on the face, gauge area and around the buckets. They protect the cutterhead structure from rock chips and fines and are replaced during maintenance shifts."
New: Face Spray Nozzle main-beam-tbm-face-spray-nozzle
- Created Face Spray Nozzle (part): "A water nozzle in the cutterhead face that sprays the cutters and the rock as they work, wetting dust where it is made and cooling the cutter rings."
New: Cutterhead Rotary Union main-beam-tbm-rotary-union
- Created Cutterhead Rotary Union (part): "A rotating water joint at the center of the cutterhead support that feeds the face spray nozzles while the cutterhead turns."
New: Cutterhead main-beam-tbm-cutterhead
- Created Cutterhead (assembly): "The rotating steel wheel at the front of the machine. It presses its disc cutters against the rock face, picks up the broken rock with buckets at its rim and drops it into the muck chute, and sprays water at the face to keep down dust."
- Added main-beam-tbm-cutterhead-structure × 1
- Added main-beam-tbm-disc-cutter × 38
- Added main-beam-tbm-center-cutter × 8
- Added main-beam-tbm-cutter-housing × 46
- Added main-beam-tbm-cutter-wedge-lock × 46
- Added main-beam-tbm-muck-bucket × 8
- Added main-beam-tbm-bucket-lip × 8
- Added main-beam-tbm-bucket-grill-bars × 8
- Added main-beam-tbm-wear-plates × 1
- Added main-beam-tbm-face-spray-nozzle × 16
- Added main-beam-tbm-rotary-union × 1
New: Cutterhead Support main-beam-tbm-cutterhead-support
- Created Cutterhead Support (part): "A heavy steel weldment at the front of the main beam. It houses the main bearing and its seals, carries the main drive units around its rear face, and mounts the roof shield, side supports and vertical support."
New: Main Bearing Rings main-beam-tbm-bearing-rings
- Created Main Bearing Rings (part): "The rings of the main bearing: one solid and one split so the roller rows can be assembled between them. The stationary ring bolts to the cutterhead support and the rotating ring to the cutterhead."
New: Main Thrust Roller Row main-beam-tbm-thrust-roller-row
- Created Main Thrust Roller Row (part): "The largest row of cylindrical rollers in the main bearing, set axially to carry the full cutterhead thrust into the cutterhead support. The rollers run in segmented cages."
New: Reverse Thrust Roller Row main-beam-tbm-reverse-thrust-roller-row
- Created Reverse Thrust Roller Row (part): "A smaller axial row of rollers on the other side of the bearing flange. It carries axial loads in reverse and, with the main row, the overturning moment from an unevenly loaded face."
New: Radial Roller Row main-beam-tbm-radial-roller-row
- Created Radial Roller Row (part): "A row of rollers set radially that carries the weight of the cutterhead and the side forces on it."
New: Main Bearing main-beam-tbm-main-bearing
- Created Main Bearing (assembly): "A three-row roller bearing several meters in diameter that lets the cutterhead turn while carrying its thrust, its weight and the overturning moment from uneven face loads. Replacing it underground is a major job, so it is sized and sealed to last the whole drive; makers keep its diameter as large as the tunnel allows, because bearing life drops when it is small relative to the bore."
- Added main-beam-tbm-bearing-rings × 1
- Added main-beam-tbm-thrust-roller-row × 1
- Added main-beam-tbm-reverse-thrust-roller-row × 1
- Added main-beam-tbm-radial-roller-row × 1
New: Bull Gear main-beam-tbm-bull-gear
- Created Bull Gear (part): "A large ring gear on the rotating side of the main bearing, either cut into the bearing ring or bolted to it. Every drive pinion meshes with it, and together they turn the cutterhead."
New: Main Drive Motor main-beam-tbm-drive-motor
- Created Main Drive Motor (part): "An electric motor of about 315 kW on a 7 m machine, run from its own frequency converter so cutterhead speed can be varied with the rock and the head can be turned slowly for cutter changes."
New: Torque-Limiting Coupling main-beam-tbm-torque-limiter
- Created Torque-Limiting Coupling (part): "A coupling between motor and gear reducer that slips above a set torque, so a sudden jam of the cutterhead cannot break gear teeth or shafts in the drive. Older single-speed drives used a hydraulically actuated friction clutch in the same place."
New: Planetary Gear Reducer main-beam-tbm-gear-reducer
- Created Planetary Gear Reducer (part): "A multi-stage planetary gearbox flange-mounted on the cutterhead support. It turns the motor's high speed and low torque into the low speed and high torque the pinion needs."
New: Drive Pinion main-beam-tbm-drive-pinion
- Created Drive Pinion (part): "The hardened output gear of a gear reducer, meshing with the bull gear. With all pinions sharing the load, the cutterhead receives the combined torque of every drive unit."
New: Main Drive Unit main-beam-tbm-drive-unit
- Created Main Drive Unit (assembly): "One of the motor and gearbox units arranged around the rear of the cutterhead support. Each pairs a main drive motor with a planetary reducer and an output pinion, with a torque-limiting coupling between them."
- Added main-beam-tbm-drive-motor × 1
- Added main-beam-tbm-torque-limiter × 1
- Added main-beam-tbm-gear-reducer × 1
- Added main-beam-tbm-drive-pinion × 1
New: Main Bearing Lip Seal main-beam-tbm-lip-seal
- Created Main Bearing Lip Seal (part): "A large-section, high-deflection elastomer lip seal running on a hardened wear band. Rows of them on each side of the main bearing keep dust and water out of the bearing and oil in."
New: Seal Wear Ring main-beam-tbm-seal-wear-ring
- Created Seal Wear Ring (part): "A replaceable hardened running band for the lip seals, one on each side of the main bearing, faced with a hard alloy such as Stellite on some machines. Spacers between the seals can be moved so the lips run on a fresh track."
New: Grease Labyrinth Ring main-beam-tbm-labyrinth-ring
- Created Grease Labyrinth Ring (part): "A labyrinth of interlocking rings outside the lip seals, constantly filled with fresh grease from the automatic grease system so that dust is pushed out instead of drawn in."
New: Main Bearing Seal System main-beam-tbm-main-seal
- Created Main Bearing Seal System (assembly): "Seals on the outer and inner side of the main bearing that keep rock dust and water out of the bearing and gear oil in. Each side has a grease-purged labyrinth outside several rows of lip seals running on a hardened wear ring."
- Added main-beam-tbm-lip-seal × 6
- Added main-beam-tbm-seal-wear-ring × 2
- Added main-beam-tbm-labyrinth-ring × 2
New: Roof Shield main-beam-tbm-roof-shield
- Created Roof Shield (part): "A curved steel shield over the cutterhead support, pressed up against the tunnel crown by hydraulic cylinders. It protects people and equipment directly behind the face from loose rock."
New: Roof Shield Fingers main-beam-tbm-finger-shield
- Created Roof Shield Fingers (part): "Steel fingers extending back from the roof shield. Rock bolts, mesh and ring beams can be installed between them close to the face while the fingers still hold loose rock. Some machines use steel slats or a lamella roof here instead."
New: Side Support main-beam-tbm-side-support
- Created Side Support (part): "A curved steel shoe on each side of the cutterhead support, pressed against the tunnel wall by hydraulic cylinders to hold the front of the machine centered and steady while boring."
New: Vertical Support main-beam-tbm-vertical-support
- Created Vertical Support (part): "A shoe under the cutterhead support that rests on the tunnel floor, carries the weight of the cutterhead and drive, and slides along the invert as the machine advances."
New: Shield Support Cylinder main-beam-tbm-support-cylinder
- Created Shield Support Cylinder (part): "A hydraulic cylinder that pushes a roof shield, side support or vertical support out against the rock and retracts it, holding it at a set pressure while the machine bores."
New: Dust Shield main-beam-tbm-dust-shield
- Created Dust Shield (part): "A steel ring with a rubber seal close behind the cutterhead that walls off the space where the rock is cut, so the dust scrubber can draw dusty air out of it before the dust reaches the work areas."
New: Roof Shield and Side Supports main-beam-tbm-head-shield
- Created Roof Shield and Side Supports (assembly): "The shields around the cutterhead support. The roof shield and its fingers protect the work zone behind the face, the side supports and vertical support steady the front of the machine in the bore, and the dust shield closes off the cutting chamber. Retracting the shields shrinks the machine's diameter, which helps free it in squeezing rock."
- Added main-beam-tbm-roof-shield × 1
- Added main-beam-tbm-finger-shield × 1
- Added main-beam-tbm-side-support × 2
- Added main-beam-tbm-vertical-support × 1
- Added main-beam-tbm-support-cylinder × 8
- Added main-beam-tbm-dust-shield × 1
New: Cutterhead Support and Main Drive main-beam-tbm-main-drive
- Created Cutterhead Support and Main Drive (assembly): "Everything that holds and turns the cutterhead. The cutterhead support carries the main bearing and its seals, drive units around it turn the cutterhead through the bull gear, and the roof shield, side supports and vertical support hold the front of the machine steady in the bore."
- Added main-beam-tbm-cutterhead-support × 1
- Added main-beam-tbm-main-bearing × 1
- Added main-beam-tbm-bull-gear × 1
- Added main-beam-tbm-drive-unit × 10
- Added main-beam-tbm-main-seal × 1
- Added main-beam-tbm-head-shield × 1
New: Main Beam main-beam-tbm-main-beam
- Created Main Beam (part): "The backbone of the machine: a long box-section steel girder bolted together from sections. The cutterhead support is bolted to its front, the gripper carrier slides along it, and the machine conveyor runs inside it."
New: Gripper Carrier main-beam-tbm-gripper-carrier
- Created Gripper Carrier (part): "The frame that holds the gripper cylinders and shoes and slides along the main beam. While the shoes are clamped against the walls it is the fixed point the thrust and torque cylinders push against."
New: Saddle Wear Pads main-beam-tbm-saddle-wear-pads
- Created Saddle Wear Pads (part): "Replaceable sliding pads in the gripper carrier that run on the wear strips of the main beam as the carrier is moved forward between strokes."
New: Gripper Shoe main-beam-tbm-gripper-shoe
- Created Gripper Shoe (part): "A large curved steel pad on each side of the machine, pressed against the tunnel wall with a force many times the thrust, so the machine can push and turn the cutterhead without slipping. It is sized to keep the pressure on the rock low, around 3 MPa on some designs, and slotted so it can pass over installed rock bolts."
New: Gripper Cylinder main-beam-tbm-gripper-cylinder
- Created Gripper Cylinder (part): "One large double-rod hydraulic cylinder across the gripper carrier that pushes both gripper shoes out against the tunnel walls and pulls them back. Because it floats in the carrier, the main beam can be shifted sideways against the clamped shoes to steer. Its pressure is set to suit the strength of the rock."
New: Thrust Cylinder Barrel main-beam-tbm-cylinder-barrel
- Created Thrust Cylinder Barrel (part): "The honed steel tube of a thrust cylinder, with the clevis that mounts it to the gripper carrier."
New: Thrust Cylinder Piston and Rod main-beam-tbm-piston-rod
- Created Thrust Cylinder Piston and Rod (part): "The piston and chrome-plated rod of a thrust cylinder, long enough for a full boring stroke."
New: Cylinder Seal Kit main-beam-tbm-cylinder-seal-kit
- Created Cylinder Seal Kit (part): "The piston seals, rod seals, wipers and guide rings that keep a hydraulic cylinder tight and its rod clean."
New: Cylinder Stroke Sensor main-beam-tbm-stroke-sensor
- Created Cylinder Stroke Sensor (part): "A magnetostrictive position sensor built into the cylinder that reports its extension, so the control system knows how far the machine has advanced in each stroke."
New: Spherical Plain Bearing main-beam-tbm-spherical-bearing
- Created Spherical Plain Bearing (part): "A swivel bearing in the mounting eye at each end of a cylinder that lets it follow small misalignments without bending the rod."
New: Thrust Cylinder main-beam-tbm-thrust-cylinder
- Created Thrust Cylinder (assembly): "A double-acting hydraulic cylinder between the gripper carrier and the cutterhead support. Extending, the thrust cylinders push the cutterhead into the rock through one boring stroke; retracting, they pull the gripper carrier forward for the next."
- Added main-beam-tbm-cylinder-barrel × 1
- Added main-beam-tbm-piston-rod × 1
- Added main-beam-tbm-cylinder-seal-kit × 1
- Added main-beam-tbm-stroke-sensor × 1
- Added main-beam-tbm-spherical-bearing × 2
New: Torque Cylinder main-beam-tbm-torque-cylinder
- Created Torque Cylinder (part): "A hydraulic cylinder between the gripper carrier and the main beam that takes the reaction torque of the cutterhead into the grippers, corrects the roll of the machine and steers it vertically."
New: Rear Support main-beam-tbm-rear-support
- Created Rear Support (part): "Hydraulic legs with a foot under the rear section of the main beam. They are lowered to the floor to carry the machine while the grippers are released and moved forward. The backup is towed from this end of the machine."
New: Main Beam, Gripper and Thrust main-beam-tbm-gripper-thrust
- Created Main Beam, Gripper and Thrust (assembly): "The main beam and the parts that move the machine forward. Gripper shoes clamped against the walls anchor the gripper carrier, thrust cylinders push the cutterhead forward along the beam one stroke at a time, torque cylinders take the cutterhead's reaction torque, and the rear support holds the beam while the grippers reset."
- Added main-beam-tbm-main-beam × 1
- Added main-beam-tbm-gripper-carrier × 1
- Added main-beam-tbm-saddle-wear-pads × 1
- Added main-beam-tbm-gripper-shoe × 2
- Added main-beam-tbm-gripper-cylinder × 1
- Added main-beam-tbm-thrust-cylinder × 4
- Added main-beam-tbm-torque-cylinder × 2
- Added main-beam-tbm-rear-support × 1
New: Hydraulic Rock Drill main-beam-tbm-rock-drill
- Created Hydraulic Rock Drill (part): "A hydraulic percussive drill that hammers and rotates a drill rod to make holes for rock bolts in the crown and walls behind the roof shield."
New: Drill Feed main-beam-tbm-drill-feed
- Created Drill Feed (part): "The beam the rock drill travels along. It pushes the drill forward as the hole deepens and holds the rod in line with a centralizer at the front."
New: Drill Positioner main-beam-tbm-drill-positioner
- Created Drill Positioner (part): "A carriage that moves the drill feed around the drill ring track and sets its angle to the rock."
New: Roof Drill main-beam-tbm-roof-drill
- Created Roof Drill (assembly): "A hydraulic rock drill on a feed beam carried around a ring track behind the roof shield. The roof drills make the holes for rock bolts in the crown and walls, and holes for drainage or grouting where needed."
- Added main-beam-tbm-rock-drill × 1
- Added main-beam-tbm-drill-feed × 1
- Added main-beam-tbm-drill-positioner × 1
New: Drill Ring Track main-beam-tbm-drill-ring-track
- Created Drill Ring Track (part): "A circular track around the machine directly behind the roof shield on which the roof drills travel, each covering its own half of the circumference on some machines, so together they reach the whole crown and walls."
New: Probe Drill main-beam-tbm-probe-drill
- Created Probe Drill (part): "A percussive drill on its own ring behind the cutterhead that drills forward past the cutterhead support, up to about 100 m ahead of the face, to find water, faults and voids before the machine reaches them and to drill holes for grouting the rock ahead."
New: Ring Beam Erector main-beam-tbm-ring-beam-erector
- Created Ring Beam Erector (part): "A rotating ring behind the roof shield that picks up curved steel ring beam segments, joins them into a full ring and expands it against the rock, so steel ribs can be set close to the face in weak ground."
New: Wire Mesh Erector main-beam-tbm-mesh-erector
- Created Wire Mesh Erector (part): "Lifts sheets of welded wire mesh up to the crown and holds them in place while they are bolted to the rock."
New: L1 Work Platform main-beam-tbm-l1-platform
- Created L1 Work Platform (part): "Platforms and walkways around the main beam directly behind the roof shield, where crews drill, bolt and erect support under the cover of the finger shield."
New: Shotcrete Manipulator main-beam-tbm-shotcrete-manipulator
- Created Shotcrete Manipulator (part): "A spraying arm on the backup that moves a shotcrete nozzle along and around the tunnel, applying sprayed concrete to the walls and crown from a safe distance in the L2 zone."
New: Ground Support Equipment main-beam-tbm-ground-support
- Created Ground Support Equipment (assembly): "The equipment that installs rock support as the tunnel advances. Roof drills, a ring beam erector, a mesh erector and a probe drill work in the L1 zone directly behind the roof shield, and shotcrete is sprayed from the backup in the L2 zone."
- Added main-beam-tbm-roof-drill × 2
- Added main-beam-tbm-drill-ring-track × 1
- Added main-beam-tbm-probe-drill × 1
- Added main-beam-tbm-ring-beam-erector × 1
- Added main-beam-tbm-mesh-erector × 1
- Added main-beam-tbm-l1-platform × 1
- Added main-beam-tbm-shotcrete-manipulator × 2
- Added Shotcrete Pump × 1
- Added Grout Mixing and Pumping Plant × 1
New: Muck Chute main-beam-tbm-muck-chute
- Created Muck Chute (part): "A steel hopper in the cutterhead support, lined with wear plate, that catches the rock released by the buckets and funnels it onto the loading zone of the machine conveyor."
New: TBM Conveyor Belt main-beam-tbm-conveyor-belt
- Created TBM Conveyor Belt (part): "A rubber conveyor belt with fabric plies and a thick, cut-resistant top cover, vulcanized into an endless loop and sized to the machine's peak rate of excavated rock."
New: Conveyor Drive Unit main-beam-tbm-conveyor-drive
- Created Conveyor Drive Unit (part): "The motor, gearbox and rubber-lagged drive pulley at the discharge end of a conveyor."
New: Tail Pulley and Take-Up main-beam-tbm-tail-pulley
- Created Tail Pulley and Take-Up (part): "The return pulley at the loading end of a conveyor, with a take-up that keeps the belt tensioned and tracking."
New: Troughing Idler Set main-beam-tbm-troughing-idler
- Created Troughing Idler Set (part): "Three rollers on a frame that shape the belt into a trough so it holds the rock. The rollers turn on sealed ball bearings."
New: Impact Idler Set main-beam-tbm-impact-idler
- Created Impact Idler Set (part): "Rollers with rubber rings under the loading point of a conveyor that absorb the impact of falling rock and protect the belt."
New: Return Idler main-beam-tbm-return-idler
- Created Return Idler (part): "A flat roller that supports the empty return run of the belt under the conveyor."
New: Belt Scraper main-beam-tbm-belt-scraper
- Created Belt Scraper (part): "A blade cleaner pressed against the belt at the drive pulley that removes sticky fines before the belt returns, so they do not build up on the idlers and pulleys."
New: Machine Conveyor main-beam-tbm-machine-conveyor
- Created Machine Conveyor (assembly): "A troughed belt conveyor running inside the main beam from the muck chute to the backup."
- Added main-beam-tbm-conveyor-belt × 1
- Added main-beam-tbm-conveyor-drive × 1
- Added main-beam-tbm-tail-pulley × 1
- Added main-beam-tbm-impact-idler × 6
- Added main-beam-tbm-troughing-idler × 30
- Added main-beam-tbm-return-idler × 12
- Added main-beam-tbm-belt-scraper × 2
New: Backup Conveyor main-beam-tbm-backup-conveyor
- Created Backup Conveyor (assembly): "A longer belt conveyor carried on the backup decks. It takes the rock from the machine conveyor and lifts it over the decks to the transfer point at the rear of the backup."
- Added main-beam-tbm-conveyor-belt × 1
- Added main-beam-tbm-conveyor-drive × 1
- Added main-beam-tbm-tail-pulley × 1
- Added main-beam-tbm-impact-idler × 4
- Added main-beam-tbm-troughing-idler × 100
- Added main-beam-tbm-return-idler × 40
- Added main-beam-tbm-belt-scraper × 2
New: Transfer Chute main-beam-tbm-transfer-chute
- Created Transfer Chute (part): "A chute at the rear of the backup that guides rock from the backup conveyor onto the tail piece of the tunnel conveyor or into muck cars waiting on the track."
New: Muck Handling main-beam-tbm-muck-handling
- Created Muck Handling (assembly): "Carries the broken rock from the cutterhead to the tunnel's haulage. The buckets drop it into the muck chute, the machine conveyor carries it through the main beam, and the backup conveyor takes it to a continuous tunnel conveyor or to rail muck cars."
- Added main-beam-tbm-muck-chute × 1
- Added main-beam-tbm-machine-conveyor × 1
- Added main-beam-tbm-backup-conveyor × 1
- Added main-beam-tbm-transfer-chute × 1
- Added Conveyor Belt Scale × 1
- Added Tunnel Muck Conveyor × 1
New: Hydraulic Oil Tank main-beam-tbm-hydraulic-tank
- Created Hydraulic Oil Tank (part): "The reservoir of the hydraulic power unit, with level and temperature sensors and a breather filter."
New: Variable Axial Piston Pump main-beam-tbm-axial-piston-pump
- Created Variable Axial Piston Pump (part): "A variable-displacement axial piston pump that supplies pressure oil to the cylinders, adjusting its output to the flow the machine needs at each moment."
New: Hydraulic Pump Motor main-beam-tbm-pump-motor
- Created Hydraulic Pump Motor (part): "An electric induction motor that drives a hydraulic pump on the power unit."
New: Hydraulic Filters main-beam-tbm-hydraulic-filters
- Created Hydraulic Filters (part): "Pressure and return filters that keep the oil clean enough for the proportional valves and pumps, with indicators that show when an element needs changing."
New: Hydraulic Oil Cooler main-beam-tbm-oil-cooler
- Created Hydraulic Oil Cooler (part): "A water-cooled heat exchanger that removes the heat the hydraulic system makes and holds the oil at its working temperature."
New: Hydraulic Accumulator main-beam-tbm-accumulator
- Created Hydraulic Accumulator (part): "A gas-charged pressure vessel that stores oil under pressure, holding gripper pressure steady and supplying oil for safe movements if the pumps stop."
New: Hydraulic Power Unit main-beam-tbm-hpu
- Created Hydraulic Power Unit (assembly): "A skid on the backup with an oil tank, electric motors driving axial piston pumps, filters and a water-cooled oil cooler. It supplies pressure oil to every cylinder and hydraulic motor on the machine."
- Added main-beam-tbm-hydraulic-tank × 1
- Added main-beam-tbm-axial-piston-pump × 4
- Added main-beam-tbm-pump-motor × 4
- Added main-beam-tbm-hydraulic-filters × 1
- Added main-beam-tbm-oil-cooler × 1
- Added main-beam-tbm-accumulator × 2
New: Proportional Valve Manifold main-beam-tbm-valve-manifold
- Created Proportional Valve Manifold (part): "A block of proportional and directional valves that meters oil to the gripper, thrust, torque or support cylinders. The control system sets thrust force, advance speed and gripper pressure through these valves."
New: Hydraulic Hoses and Piping main-beam-tbm-hydraulic-hoses
- Created Hydraulic Hoses and Piping (part): "High-pressure hoses and steel pipe that carry oil between the power unit and the cylinders and tools, with hose loops that take up the change in length between the gripper carrier and the cutterhead support each stroke."
New: Main Drive Gear Oil System main-beam-tbm-gear-oil-system
- Created Main Drive Gear Oil System (part): "A pump, filters and cooler that circulate gear oil through the main bearing and the bull gear mesh, with monitoring of oil temperature and flow. The cutterhead will not start without it."
New: Automatic Grease System main-beam-tbm-grease-system
- Created Automatic Grease System (part): "A grease pump and distributors that keep pushing fresh grease into the main bearing labyrinths and lubricate pins and slides around the machine."
New: Hydraulics and Lubrication main-beam-tbm-hydraulics
- Created Hydraulics and Lubrication (assembly): "The hydraulic power unit and valve manifolds that work the grippers, thrust, torque and support cylinders and the ground support tools, and the oil and grease systems that lubricate and seal the main bearing and drive."
- Added main-beam-tbm-hpu × 1
- Added main-beam-tbm-valve-manifold × 4
- Added main-beam-tbm-hydraulic-hoses × 1
- Added main-beam-tbm-gear-oil-system × 1
- Added main-beam-tbm-grease-system × 1
New: High-Voltage Cable Reel main-beam-tbm-hv-cable-reel
- Created High-Voltage Cable Reel (part): "A motorized drum on the backup that stores a few hundred meters of medium-voltage trailing cable and pays it out as the machine advances. When it runs empty, a new length of cable is spliced into the tunnel supply."
New: Main Drive Frequency Converter main-beam-tbm-vfd-cabinet
- Created Main Drive Frequency Converter (part): "A cabinet with the frequency converter for one main drive motor. The converters run all motors together at the speed the operator sets, start the cutterhead smoothly and inch it slowly for cutter changes."
New: Low-Voltage Distribution and Motor Control main-beam-tbm-lv-distribution
- Created Low-Voltage Distribution and Motor Control (part): "Switchboards and motor starters that feed the pumps, conveyors, fans, compressor and hoists, with protection for each circuit."
New: Earth Leakage and Insulation Monitoring main-beam-tbm-earth-leakage
- Created Earth Leakage and Insulation Monitoring (part): "Relays that trip a circuit when current leaks to earth and that watch cable insulation, needed underground where water and damaged trailing cables make shocks more likely."
New: Power and Control Cabling main-beam-tbm-cabling
- Created Power and Control Cabling (part): "Cables, trays and connectors linking the switchgear, transformers, converters, motors and control panels along the machine and backup."
New: Machine Lighting main-beam-tbm-lighting
- Created Machine Lighting (part): "LED floodlights over the work areas, walkways and decks, with emergency fittings that stay lit on battery when the supply fails."
New: Electrical Power main-beam-tbm-electrical
- Created Electrical Power (assembly): "Takes the medium-voltage tunnel supply from the cable reel, switches and transforms it, and feeds the frequency converters for the main drive and the motors, lighting and controls everywhere else. A diesel generator and a UPS cover supply failures."
- Added main-beam-tbm-hv-cable-reel × 1
- Added Switchgear Panel × 1
- Added Dry-Type Transformer × 2
- Added main-beam-tbm-vfd-cabinet × 10
- Added main-beam-tbm-lv-distribution × 1
- Added main-beam-tbm-earth-leakage × 1
- Added main-beam-tbm-cabling × 1
- Added main-beam-tbm-lighting × 1
- Added Diesel Generator × 1
- Added Industrial UPS System × 1
New: Operator Cabin main-beam-tbm-operator-cabin
- Created Operator Cabin (part): "An enclosed, air-conditioned and sound-insulated cabin on the backup from which the operator runs the boring cycle."
New: Operator Console main-beam-tbm-operator-console
- Created Operator Console (part): "Screens and controls for thrust, cutterhead speed, gripper pressure and steering, showing the guidance display, camera images, alarms and live boring data."
New: PLC and Remote I/O main-beam-tbm-plc
- Created PLC and Remote I/O (part): "The programmable controller and its input and output stations along the machine. It interlocks the boring cycle, so there is no thrust without gripping and no rotation without lubrication, runs the conveyors in sequence, and passes data to the logging system."
New: Guidance Target Unit main-beam-tbm-guidance-target
- Created Guidance Target Unit (part): "An active target mounted on the machine with a sensor for the total station's laser and inclinometers for pitch and roll. From it the guidance computer works out where the machine is and which way it points."
New: Guidance Computer main-beam-tbm-guidance-computer
- Created Guidance Computer (part): "An industrial computer with the guidance software. It compares the measured machine position with the tunnel's design alignment and shows the operator the deviation and the steering needed."
New: Reference Prism main-beam-tbm-reference-prism
- Created Reference Prism (part): "A survey prism fixed to the tunnel wall behind the total station. The station measures to it to fix its own position each time it is moved forward."
New: Laser Guidance System main-beam-tbm-guidance
- Created Laser Guidance System (assembly): "A motorized total station on the tunnel wall behind the machine measures a target unit on the machine, and the guidance computer compares the result with the tunnel's design line and shows the operator the deviation and the steering correction. Surveyors move the station forward as the tunnel advances."
- Added Total Station × 1
- Added main-beam-tbm-guidance-target × 1
- Added main-beam-tbm-guidance-computer × 1
- Added main-beam-tbm-reference-prism × 2
New: Boring Data Acquisition System main-beam-tbm-data-acquisition
- Created Boring Data Acquisition System (part): "Records thrust, torque, cutterhead speed, penetration, pressures, power and alarms for every stroke and sends them to the site office, where engineers read rock conditions and cutter wear from the trends."
New: Fixed Gas Monitoring System main-beam-tbm-gas-monitoring
- Created Fixed Gas Monitoring System (part): "Fixed sensors for methane, carbon monoxide, oxygen and other gases near the face, in the cabin and along the backup. Readings above set limits sound alarms, and high methane trips the power to the machine."
New: Tunnel Communication System main-beam-tbm-communication
- Created Tunnel Communication System (part): "Telephones, a fiber-optic data link to the surface and radio coverage along the tunnel, so the crew, the supply trains and the surface can talk and boring data reaches the office."
New: Disc Cutter Monitoring System main-beam-tbm-cutter-monitoring
- Created Disc Cutter Monitoring System (part): "Sensors on the cutter mountings, such as on the wedge bolts, that count each cutter's revolutions and, on some systems, measure its temperature, and report to the cabin. A seized or failing cutter is found before it wears flat and damages its neighbors."
New: Fire Detection and Suppression System main-beam-tbm-fire-suppression
- Created Fire Detection and Suppression System (part): "Heat and smoke detectors with fixed foam or water mist nozzles over the hydraulic power unit, transformers, converters and cabin, released automatically or by hand."
New: Control, Guidance and Monitoring main-beam-tbm-control
- Created Control, Guidance and Monitoring (assembly): "The operator runs the machine from a cabin through a PLC that controls the drives, cylinders and conveyors and records every boring parameter. A laser guidance system shows the machine's position against the design line, and gas detection, cameras and fire suppression protect the crew."
- Added main-beam-tbm-operator-cabin × 1
- Added main-beam-tbm-operator-console × 1
- Added main-beam-tbm-plc × 1
- Added main-beam-tbm-guidance × 1
- Added main-beam-tbm-data-acquisition × 1
- Added main-beam-tbm-gas-monitoring × 1
- Added Portable 4-Gas Detector × 2
- Added CCTV Camera × 6
- Added main-beam-tbm-communication × 1
- Added main-beam-tbm-cutter-monitoring × 1
- Added main-beam-tbm-fire-suppression × 1
- Added Fire Extinguisher × 10
New: Backup Deck main-beam-tbm-backup-deck
- Created Backup Deck (part): "A steel gantry frame that carries equipment above a clear space for the supply track, so muck and supply trains can run underneath. The decks are coupled into a train towed behind the machine."
New: Backup Wheel Set main-beam-tbm-backup-wheel-set
- Created Backup Wheel Set (part): "A bogie of flanged steel wheels under a backup deck, running on the tunnel track."
New: Backup Bridge main-beam-tbm-backup-bridge
- Created Backup Bridge (part): "A bridge structure between the rear of the main beam and the first backup deck. It carries the conveyor transfer and, on some machines, the shotcrete robot, and leaves the tunnel floor beneath it clear for laying track, invert segments or a roadbed."
New: Material Handling Crane main-beam-tbm-material-crane
- Created Material Handling Crane (part): "An overhead crane over the supply track at the front of the backup that unloads rails, ring beams, mesh, rock bolts and spare cutters from the supply train and carries them forward."
New: Ventilation Duct Cassette main-beam-tbm-duct-cassette
- Created Ventilation Duct Cassette (part): "A cassette on the backup that holds a length of folded flexible ventilation duct and pays it out as the machine advances, so fresh air from the portal fans keeps reaching the front of the backup."
New: Scrubber Fan main-beam-tbm-scrubber-fan
- Created Scrubber Fan (part): "The fan that draws dusty air from behind the dust shield through the scrubber."
New: Scrubber Filter Stage main-beam-tbm-scrubber-filter
- Created Scrubber Filter Stage (part): "The stage that takes the dust out of the air: a fibrous filter panel kept wet by sprays on a wet scrubber, or filter cartridges cleaned by pulses of compressed air on a dry unit."
New: Dust Extraction Duct main-beam-tbm-scrubber-duct
- Created Dust Extraction Duct (part): "Duct that carries dusty air from behind the dust shield back through the main beam to the scrubber."
New: Scrubber Dust Discharge main-beam-tbm-dust-discharge
- Created Scrubber Dust Discharge (part): "Returns the collected dust to the muck conveyor, as slurry pumped from the sump of a wet scrubber or as dry dust from the hopper of a filter unit."
New: Dust Scrubber main-beam-tbm-dust-scrubber
- Created Dust Scrubber (assembly): "Draws dusty air from behind the dust shield through a duct along the main beam, removes most of the rock dust and returns the air to the tunnel. Wet scrubbers and dry cartridge filters are both used."
- Added main-beam-tbm-scrubber-fan × 1
- Added main-beam-tbm-scrubber-filter × 1
- Added main-beam-tbm-scrubber-duct × 1
- Added main-beam-tbm-dust-discharge × 1
New: Water Hose Reel main-beam-tbm-water-hose-reel
- Created Water Hose Reel (part): "A drum on the backup that stores hose for the fresh water supply and the discharge line and pays it out as the machine advances, until the next pipe section is added to the tunnel line."
New: Water Tank main-beam-tbm-water-tank
- Created Water Tank (part): "A tank on the backup that buffers the fresh water supply for the sprays, scrubber, drills and cooling circuit."
New: Water Booster Pump main-beam-tbm-water-pump
- Created Water Booster Pump (part): "A centrifugal pump that raises the water pressure for the cutterhead sprays, scrubber and drills."
New: Plate Heat Exchanger main-beam-tbm-heat-exchanger
- Created Plate Heat Exchanger (part): "Passes the heat from the closed cooling circuit of the motors, converters and hydraulic oil to the tunnel water that leaves the machine, keeping the cooling circuit clean."
New: Water Supply and Cooling main-beam-tbm-water-system
- Created Water Supply and Cooling (assembly): "Takes fresh water from the tunnel water line through a hose reel, stores it in a tank and pumps it to the cutterhead sprays, dust scrubber and drills. A closed cooling circuit carries heat from the motors, converters and hydraulic oil to a plate heat exchanger."
- Added main-beam-tbm-water-hose-reel × 1
- Added main-beam-tbm-water-tank × 1
- Added main-beam-tbm-water-pump × 2
- Added main-beam-tbm-heat-exchanger × 1
New: Dewatering Pump main-beam-tbm-dewatering-pump
- Created Dewatering Pump (part): "A submersible drainage pump that lifts water from the floor behind the cutterhead into the discharge line, needed most on downhill drives where inflow runs toward the face."
New: Refuge Chamber main-beam-tbm-refuge-chamber
- Created Refuge Chamber (part): "A sealed steel shelter on the backup with its own breathing air supply, carbon dioxide scrubbing and cooling, sized to keep the whole shift alive for a day or more if fire or gas cuts them off from the portal."
New: Workshop and Spares Store main-beam-tbm-workshop
- Created Workshop and Spares Store (part): "A container on the backup with a bench, tools and racks of spare cutters, hoses and wear parts, kept close to the cutterhead for maintenance shifts."
New: Backup System and Tunnel Services main-beam-tbm-backup
- Created Backup System and Tunnel Services (assembly): "A train of steel decks towed behind the machine that carries its power, hydraulics, conveyors and services, and supplies the tunnel behind it with fresh air, water, compressed air, drainage and material handling, plus a refuge chamber for the crew."
- Added main-beam-tbm-backup-bridge × 1
- Added main-beam-tbm-backup-deck × 8
- Added main-beam-tbm-backup-wheel-set × 16
- Added main-beam-tbm-material-crane × 1
- Added Electric Chain Hoist × 4
- Added main-beam-tbm-duct-cassette × 1
- Added Tunnel Ventilation Fan × 1
- Added main-beam-tbm-dust-scrubber × 1
- Added main-beam-tbm-water-system × 1
- Added main-beam-tbm-dewatering-pump × 2
- Added Rotary Screw Air Compressor × 1
- Added main-beam-tbm-refuge-chamber × 1
- Added main-beam-tbm-workshop × 1
Machine findings
- Backup System and Tunnel Services: 13 direct children (dominant function: Manage heat), worth checking for integration or standardization
- Control, Guidance and Monitoring: 12 direct children (dominant function: Convert energy), worth checking for integration or standardization
- Cutterhead: 11 direct children (dominant function: Process material), worth checking for integration or standardization
- Electrical Power: 10 direct children (dominant function: Convert energy), worth checking for integration or standardization
- Main Beam Tunnel Boring Machine: 9 direct children (dominant function: Guide motion), worth checking for integration or standardization
- Main Beam Tunnel Boring Machine functions after this change: Communicate signal, Filter or clean, Convert energy
- Cutterhead Structure functions after this change: Guide motion
- Disc Cutter Ring functions after this change: Process material