Heating System
AssemblyHot-water coils on the tank wall fed from a boiler or CHP jacket loop, holding the slurry at 38–42 °C. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Heating System
5 top-level lines as of r4497| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Wall Heating Coil | anaerobic-digester-wall-coil | 1× | 1 | · | part |
| 2 | Coolant Pump | coolant-pump | 1× | 1 | · | part |
| 3 | Heating Manifold | anaerobic-digester-heating-manifold | 1× | 1 | · | part |
| 4 | Heating Mixing Valve | anaerobic-digester-mixing-valve | 1× | 1 | · | part |
| 5 | Slurry Temperature Sensor | anaerobic-digester-temp-sensor | 3× | 3 | · | part |