Material Handling parts lists

Parts common across material handling 12

Shared components ranked by how many of the 111 products in this domain contain them, directly or inside a sub-assembly.

1. Fastener Set in 94 of 111 productsBolts, nuts, and washers.
2. Ball Bearing in 89 of 111 productsDeep-groove radial ball bearing.
3. Microcontroller in 77 of 111 productsSingle-chip microcontroller combining a processor core, flash memory, RAM, and peripherals such as timers, ADCs, and serial ports to run the device's control firmware.
4. Wire Bundle in 77 of 111 productsGroup of insulated conductors cut to length, terminated, and bound together to carry power and signals between the assemblies of a machine.
5. Relay in 74 of 111 productsElectromechanical switch in which a small coil current closes or opens contacts rated for a much larger load, isolating control circuits from what they switch.
6. Bare PCB in 73 of 111 productsUnpopulated printed circuit board: copper traces etched on an FR-4 glass-epoxy laminate that carry current between the components later soldered to it.
7. Connector in 67 of 111 productsMating plug-and-socket pair that joins two lengths of wiring or a cable to a board so a circuit can be assembled, serviced, and separated without soldering.
8. Helical Gear Pair in 67 of 111 productsTwo meshing helical gears forming one reduction stage that steps torque up and speed down between parallel shafts with quiet, continuous tooth contact.
9. Oil Seal in 63 of 111 productsSpring-loaded rotary lip seal that keeps lubricant inside a housing and dirt out where a shaft passes through, sized to DIN 3760.
10. Copper Winding in 61 of 111 productsInsulated copper conductor wound into coils that carry the phase current and create the magnetic field in a motor, generator, or transformer.
11. Gearbox Housing in 61 of 111 productsRigid cast housing that holds the gears and bearings in alignment, contains the lubricant, and mounts the gearbox to the machine.
12. Neodymium Magnet in 60 of 111 productsSintered neodymium-iron-boron permanent magnet, the strongest commercial magnet type, used for motor rotors, sensors, latches, and speakers.