Small Kitchen Appliances parts lists
BOMwiki lists 100 products in small kitchen appliances, with 6,909 parts counted across their recorded bills of materials. The highest recorded part count is the sous vide immersion circulator at 294 parts across 9 top-level items; the lowest is the AeroPress coffee maker at 12. Open a product to explore its recorded components and their roles. Counts describe the current BOMs, not a complete inventory of every product variant.
Kettle and toaster parts
Compare two electrically heated appliances: a kettle heats water, while a toaster browns bread. These generic reference BOMs explain component roles, not manufacturer-specific replacement parts.
- Electric kettle: Follow the water vessel, concealed heater and detachable mains base, then distinguish normal shutoff from dry-boil protection.
- Pop-up toaster: Follow the heating elements, bread carriage and powered latch, then compare the roles of browning, defrost and cancel controls.
100 products
Shared component references 12
Components ranked by how many of the 100 recorded product BOMs reference the same page, directly or through a sub-assembly. A shared reference does not establish replacement-part compatibility.
- Fastener Set in 89 of 100 productsBolts, nuts, and washers.
- Connector in 76 of 100 productsMating plug-and-socket pair that joins two lengths of wiring or a cable to a board so a circuit can be assembled, serviced, and separated without soldering.
- Wire Bundle in 69 of 100 productsGroup of insulated conductors cut to length, terminated, and bound together to carry power and signals between the assemblies of a machine.
- Bare PCB in 67 of 100 productsUnpopulated printed circuit board: copper traces etched on an FR-4 glass-epoxy laminate that carry current between the components later soldered to it.
- Heating Element in 61 of 100 productsResistance wire or ribbon in a metal sheath or ceramic carrier that converts electric current into heat.
- Microcontroller in 55 of 100 productsSingle-chip microcontroller combining a processor core, flash memory, RAM, and peripherals such as timers, ADCs, and serial ports to run the device's control firmware.
- Relay in 52 of 100 productsElectromechanical switch in which a small coil current closes or opens contacts rated for a much larger load, isolating control circuits from what they switch.
- Ball Bearing in 50 of 100 productsDeep-groove radial ball bearing.
- Thermal Fuse in 48 of 100 productsOne-shot cutoff that opens if a heating appliance overheats.
- O-Ring Set in 36 of 100 productsSet of elastomer rings seated in grooves to seal static or slow-moving joints against fluid and gas, sized to ISO 3601.
- SMD Passive (R/C/L) in 35 of 100 productsSurface-mount resistors, capacitors, and inductors, typically in 0402 to 1206 packages, that set voltages, filter noise, and time signals on a circuit board.
- Copper Winding in 34 of 100 productsInsulated copper conductor wound into coils that carry the phase current and create the magnetic field in a motor, generator, or transformer.