Blow Air System
AssemblyBlow pin and valving that inflate the parison against the mold wall. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Blow Air System
5 top-level lines as of r60520| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Blow Pin | ebm-blow-pin | 1× | 1 | · | part |
| 2 | Blow Valve | ebm-blow-valve | 1× | 1 | · | part |
| 3 | Air Receiver | ebm-air-receiver | 1× | 1 | · | part |
| 4 | Exhaust Valve | ebm-exhaust-valve | 1× | 1 | · | part |
| 5 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |