Reverse-Osmosis Module
AssemblyA booster pump drives pretreated water through spiral-wound membranes at 8-12 bar, splitting it into permeate and a concentrate stream that goes to drain. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Reverse-Osmosis Module
7 top-level lines as of r187373| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Booster Pump 6 parts | water-refill-station-booster-pump | 1× | 1 | 0 | assembly |
| 2 | RO Membrane Element | water-refill-station-ro-membrane | 2× | 2 | · | part |
| 3 | Membrane Housing | water-refill-station-membrane-housing | 2× | 2 | · | part |
| 4 | Concentrate Valve | water-refill-station-concentrate-valve | 1× | 1 | · | part |
| 5 | Flush Valve | water-refill-station-flush-valve | 1× | 1 | · | part |
| 6 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |
| 7 | TDS Probe | water-refill-station-tds-probe | 2× | 2 | · | part |