BOMwiki the bill-of-materials encyclopedia
30,441,948 parts mapped · 192,925 items

You are viewing r51731 of this page, not the current version. Go to current · history

Dual-Sport Motorcycle

Product

Overview

A dual-sport motorcycle is a street-legal machine built to leave the pavement. It carries lights, mirrors, a license plate, and a horn so it can be ridden legally on public roads, but its geometry, suspension travel, and tires are dirt-bike specifications. The example here is a 650 cc single-cylinder model: light at around 150 kg, narrow, and tall, with a Single-Cylinder Engine tuned for usable torque rather than peak power. The defining compromise is range of use. A dual-sport is not as fast or comfortable on the highway as a road bike, and not as light or capable on a hard trail as a pure dirt bike, but it can ride from home to the trailhead, work a fire road, and ride back, all on one registration.

Engine and transmission

The single-cylinder layout is chosen for simplicity, narrowness, and low mass. The Crankcase is compact, and a heavy crank flywheel on the Crankshaft stores energy so the engine pulls cleanly from low rpm without stalling in technical sections. A single Piston and a four-valve Cylinder Head keep the package small. Because a single cylinder shakes badly, a gear-driven Balancer Shaft spins opposite the crank to cancel the primary vibration. Drive passes through a wet Wet Clutch with fine slip control, important for crawling over obstacles, into a wide-ratio 5-Speed Gearbox whose low first gear suits steep climbs and tall fifth suits the road home.

Frame and suspension

The Steel Frame is a steel semi-double-cradle that loops under the engine, giving a tough mounting point and protecting the cases. A bolt-on Rear Subframe carries the seat and tail so a bent tail in a crash is a cheap repair. Suspension travel is long: the inverted Front Fork offers about 255 mm and the Rear Monoshock about 270 mm, actuated through a Suspension Linkage that gives a soft initial stroke for small bumps and firms up to resist bottoming on landings. Both ends are adjustable for compression and rebound so the rider can soften the bike for trails or firm it up for road speed. This much travel is the main reason the seat sits near 890 mm off the ground.

Wheels, tires, and final drive

Wheel sizes follow off-road convention: a large 21-inch Front Wheel rolls over rocks and ruts, and an 18-inch Rear Wheel balances grip and strength. Both use spoked Spoked Rim wheels with Inner Tube tubes and knobby Tire tires that can be swapped for road-biased rubber. Final drive is by an O-ring Chain running off a Countershaft Sprocket to a rear sprocket. Chain drive is light and lets the rider change overall gearing in minutes by swapping sprockets, a flexibility that matters when the same bike runs both tight trails and open highway.

Brakes and electronics

The Brake System uses a single front and rear disc with a ABS Module that the rider can disable at the rear, because locking the rear wheel is a useful technique on dirt. The Electrical System system is deliberately simple: a fuel-injection Electronic Control Unit, a compact LCD Instrument Cluster, a small 12 V Battery, and an LED headlight. Keeping electronics minimal cuts weight and reduces the number of things that can fail far from a workshop. The Fuel System feeds a single ride-by-cable Throttle Body from a slim Fuel Tank shaped so the rider's knees grip the bike when standing on the pegs.

Bodywork and ergonomics

The Bodywork is sparse on purpose. A high-mount Front Fender keeps mud from packing against the tire, slim Side Panel plastics shed dirt, and a small Headlight Mask carries the lighting. The seat is flat so the rider can slide forward and back to shift weight over the wheels, and a Skid Plate guards the engine. Hand Guard shells protect the levers from branches. The whole bike is built to be picked up easily after a fall and to take repeated low-speed drops without expensive damage.

Use and variants

Dual-sports range from small, light enduro-derived models that lean toward dirt, up to larger machines like this one that can hold highway speed comfortably. Owners commonly fit a larger fuel tank, a more comfortable seat, and a sump-protecting skid plate for longer rides. The category overlaps with adventure bikes at the heavy end and with enduros at the light end, but the unifying trait is that the machine is genuinely usable on both surfaces straight from the dealer, with nothing more than a tire change needed to bias it one way or the other.

Bill of materials for Dual-Sport Motorcycle

11 top-level lines as of r51731
# Item / sub-assembly Part no. Qty/assy Ext. qty Parts Type
1 Single-Cylinder Engine 12 parts dual-sport-motorcycle-engine 1× 1 0 assembly
2 Steel Frame 6 parts dual-sport-motorcycle-frame 1× 1 0 assembly
3 Front Fork 6 parts dual-sport-motorcycle-front-suspension 1× 1 0 assembly
4 Rear Monoshock 4 parts dual-sport-motorcycle-rear-suspension 1× 1 0 assembly
5 Front Wheel 7 parts dual-sport-motorcycle-front-wheel-assy 1× 1 0 assembly
6 Rear Wheel 8 parts dual-sport-motorcycle-rear-wheel-assy 1× 1 0 assembly
7 Brake System 6 parts dual-sport-motorcycle-brake-system 1× 1 0 assembly
8 Chain Final Drive 3 parts dual-sport-motorcycle-final-drive 1× 1 0 assembly
9 Bodywork 6 parts dual-sport-motorcycle-bodywork 1× 1 0 assembly
10 Electrical System 7 parts dual-sport-motorcycle-electrical 1× 1 0 assembly
11 Fuel System 5 parts dual-sport-motorcycle-fuel-system 1× 1 0 assembly

855-word article