Control & Ignition
AssemblyCapillary thermostat, ignition module, and limit devices that cycle the burner to hold the set temperature and shut it down on any fault. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control & Ignition
7 top-level lines as of r77540| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Capillary Thermostat | greenhouse-heater-thermostat | 1× | 1 | · | part |
| 2 | Ignition Module | greenhouse-heater-ignition-module | 1× | 1 | · | part |
| 3 | High-Limit Switch | greenhouse-heater-high-limit | 1× | 1 | · | part |
| 4 | ODS Pilot | greenhouse-heater-ods-pilot | 1× | 1 | · | part |
| 5 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 6 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 7 | Thermal Fuse | thermal-fuse | 1× | 1 | · | part |