Material Heater
AssemblyAn electric immersion or circulation heater warming bitumen or polyurea undercoating from 10–20 °C ambient to 40–60 °C, reducing viscosity for smooth spraying without degrading the material. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Material Heater
5 top-level lines as of r179949| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Heater Element | us-heater-element | 1× | 1 | · | part |
| 2 | Thermostat | us-thermostat | 1× | 1 | · | part |
| 3 | Temp Sensor | us-temperature-sensor | 1× | 1 | · | part |
| 4 | Insulation | us-insulation-jacket | 1× | 1 | · | part |
| 5 | SMD Passive (R/C/L) | smd-passives | 10× | 10 | · | part |