Fuselage
AssemblyCabin structure, tail boom, skins, doors and windows. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Fuselage parts and their functions
25 top-level parts · 10,053 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Cabin Structure | 1× | Welded/bonded primary airframe structure. |
| 2 | Tail Boom | 1× | Semi-monocoque boom carrying the tail rotor assembly. |
| 3 | Skin Panel | 8× | Composite/aluminium outer skin panel. |
| 4 | Cabin Door | 4× | Hinged cabin door with latch. |
| 5 | Window / Windshield | 6× | Acrylic transparency. |
| 6 | Seat Assembly 5 parts | 5× | crew + passengers |
| 7 | Fuselage Frame | 28× | Formed or machined transverse frame of the cabin structure or tail boom. |
| 8 | Stringer & Longeron | 64× | Longitudinal stiffener riveted to the skin. |
| 9 | Airframe Rivet | 7200× | Solid or blind rivet joining skins, frames and stringers. |
| 10 | Fairing & Cowling | 12× | Removable composite fairing or engine cowling panel with quick-release latches. |
| 11 | Access Panel | 22× | Removable inspection panel with camloc or screw fasteners. |
| 12 | Latch & Camloc | 60× | Quarter-turn fastener or latch on a cowling, door or panel. |
| 13 | Bonding Jumper | 40× | Braided strap electrically bonding a panel or component to the airframe. |
| 14 | Door Hinge & Latch | 4× | Hinge, latch, stay and jettison mechanism for one cabin door. |
| 15 | Seat Belt & Harness | 5× | Four-point harness with inertia reel for one seat. |
| 16 | Interior Trim Panel | 20× | Lightweight moulded lining panel inside the cabin. |
| 17 | Soundproofing Blanket | 24× | Quilted insulation blanket behind the cabin lining. |
| 18 | Floor Panel | 8× | Honeycomb sandwich floor panel with tie-down fittings. |
| 19 | Cargo Tie-Down Fitting | 8× | Recessed ring in the floor for cargo restraint. |
| 20 | Horizontal Stabilizer | 1× | Fixed tailplane on the tail boom with end plates. |
| 21 | Vertical Fin | 1× | Fin at the end of the tail boom carrying the tail rotor. |
| 22 | Tail Rotor Guard | 1× | Tubular guard below the tail rotor. |
| 23 | Hex Bolt | 900× | structural and equipment fasteners |
| 24 | Hex Nut | 700× | Flanged or nyloc hex nut mating the bolts. |
| 25 | Washer | 900× | Flat or spring washer under bolt heads and nuts. |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Fuselage
25 top-level lines · 30 rows shown · 10,053 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Cabin Structure | helicopter-cabin-structure | 1× | 1 | · | part |
| 2 | Tail Boom | helicopter-tail-boom | 1× | 1 | · | part |
| 3 | Skin Panel | helicopter-skin-panel | 8× | 8 | · | part |
| 4 | Cabin Door | helicopter-door | 4× | 4 | · | part |
| 5 | Window / Windshield | helicopter-window | 6× | 6 | · | part |
| 6 | Seat Assembly 5 parts | seat-assembly | 5× | 5 | 7 | assembly |
| 6.1 | Seat Frame | seat-frame | 1× | 5 | · | part |
| 6.2 | Seat Foam | seat-foam | 2× | 10 | · | part |
| 6.3 | Seat Cover | seat-cover | 1× | 5 | · | part |
| 6.4 | Seat Motor | seat-motor | 2× | 10 | · | part |
| 6.5 | Seat Heater Mat | seat-heater | 1× | 5 | · | part |
| 7 | Fuselage Frame | helicopter-frame | 28× | 28 | · | part |
| 8 | Stringer & Longeron | helicopter-stringer | 64× | 64 | · | part |
| 9 | Airframe Rivet | helicopter-rivet | 7200× | 7,200 | · | part |
| 10 | Fairing & Cowling | helicopter-fairing | 12× | 12 | · | part |
| 11 | Access Panel | helicopter-access-panel | 22× | 22 | · | part |
| 12 | Latch & Camloc | helicopter-latch | 60× | 60 | · | part |
| 13 | Bonding Jumper | helicopter-bonding-jumper | 40× | 40 | · | part |
| 14 | Door Hinge & Latch | helicopter-door-hardware | 4× | 4 | · | part |
| 15 | Seat Belt & Harness | helicopter-seat-belt | 5× | 5 | · | part |
| 16 | Interior Trim Panel | helicopter-interior-trim | 20× | 20 | · | part |
| 17 | Soundproofing Blanket | helicopter-soundproofing | 24× | 24 | · | part |
| 18 | Floor Panel | helicopter-floor-panel | 8× | 8 | · | part |
| 19 | Cargo Tie-Down Fitting | helicopter-tie-down | 8× | 8 | · | part |
| 20 | Horizontal Stabilizer | helicopter-horizontal-stabilizer | 1× | 1 | · | part |
| 21 | Vertical Fin | helicopter-vertical-fin | 1× | 1 | · | part |
| 22 | Tail Rotor Guard | helicopter-tail-rotor-guard | 1× | 1 | · | part |
| 23 | Hex Bolt | helicopter-hex-bolt | 900× | 900 | · | part |
| 24 | Hex Nut | helicopter-hex-nut | 700× | 700 | · | part |
| 25 | Washer | helicopter-washer | 900× | 900 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the fuselage is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$200. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
| bharatforge.com ↗ | Pune, IN | Forgings & metal parts | 500 pcs | 6–10 wks |
| dicastal.com ↗ | Qinhuangdao, CN | Aluminium castings & wheels | 500 pcs | 6–10 wks |
| tataautocomp.com ↗ | Pune, IN | Auto components | 500 pcs | 6–10 wks |
|
🇸🇬Beyonics
beyonics.com ↗
|
Singapore | Precision metal & mfg | 500 pcs | 6–10 wks |
| sundaram-clayton.com ↗ | Chennai, IN | Die castings | 500 pcs | 6–10 wks |