Turboshaft Engine
AssemblyFree-turbine turboshaft with FADEC control and accessory gearbox. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Turboshaft Engine
21 top-level lines as of r193163| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Compressor Section | helicopter-compressor | 1× | 1 | · | part |
| 2 | Combustor (Annular) | helicopter-combustor | 1× | 1 | · | part |
| 3 | Gas-Generator Turbine | helicopter-gg-turbine | 1× | 1 | · | part |
| 4 | Free Power Turbine | helicopter-power-turbine | 1× | 1 | · | part |
| 5 | FADEC Unit 4 parts | helicopter-fadec | 1× | 1 | 0 | assembly |
| 6 | Accessory Gearbox 3 parts | helicopter-accessory-gearbox | 1× | 1 | 0 | assembly |
| 7 | Fuel Control Unit 2 parts | helicopter-fuel-control | 1× | 1 | 0 | assembly |
| 8 | Compressor Blade | helicopter-compressor-blade | 210× | 210 | · | part |
| 9 | Compressor Stator Vane | helicopter-compressor-vane | 160× | 160 | · | part |
| 10 | Turbine Blade | helicopter-turbine-blade | 96× | 96 | · | part |
| 11 | Turbine Nozzle Vane | helicopter-turbine-vane | 60× | 60 | · | part |
| 12 | Fuel Nozzle | helicopter-fuel-nozzle | 12× | 12 | · | part |
| 13 | Igniter Plug | helicopter-igniter | 2× | 2 | · | part |
| 14 | Engine Mount | helicopter-engine-mount | 3× | 3 | · | part |
| 15 | Exhaust Duct | helicopter-exhaust-duct | 1× | 1 | · | part |
| 16 | Air Inlet & Particle Separator | helicopter-inlet | 1× | 1 | · | part |
| 17 | Engine Oil Tank & Cooler | helicopter-engine-oil-system | 1× | 1 | · | part |
| 18 | Engine Sensor | helicopter-engine-sensor | 14× | 14 | · | part |
| 19 | Engine Bolt & Stud | helicopter-engine-bolt | 260× | 260 | · | part |
| 20 | Ball Bearing | ball-bearing | 6× | 6 | · | part |
| 21 | Oil Seal | oil-seal | 6× | 6 | · | part |