Tilting Rotor Nacelle
AssemblyWingtip pod carrying a proprotor, its motor and ESC, rotated through 95 degrees by a tilt servo. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Tilting Rotor Nacelle parts and their functions
6 top-level parts · 64 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Proprotor | 1× | Carbon two-blade rotor sized as a compromise between hover disc loading and cruise propeller efficiency. |
| 2 | Brushless Motor 4 parts | 1× | Outrunner BLDC motor of about 2.2 kW peak driving the proprotor directly. |
| 3 | Electronic Speed Controller 5 parts | 1× | Three-phase inverter commutating the motor at up to 80 A with field-oriented control. |
| 4 | Servo Motor 4 parts | 1× | tilt actuator |
| 5 | Tilt Spindle | 1× | Hollow titanium shaft carrying nacelle loads into the wing spar while passing power and signal wiring through its bore. |
| 6 | Hall Sensor | 1× | tilt angle feedback |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Tilting Rotor Nacelle
6 top-level lines · 33 rows shown · 64 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Proprotor | tiltrotor-uav-proprotor | 1× | 1 | · | part |
| 2 | Brushless Motor 4 parts | tiltrotor-uav-brushless-motor | 1× | 1 | 25 | assembly |
| 2.1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 2.1.1 | Stator Core (laminations) | stator-core | 1× | 1 | · | part |
| 2.1.2 | Copper Winding | copper-winding | 1× | 1 | · | part |
| 2.1.3 | Slot Insulation | stator-insulation | 1× | 1 | · | part |
| 2.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 2.2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | · | part |
| 2.2.2 | Rotor Core | rotor-core | 1× | 1 | · | part |
| 2.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | · | part |
| 2.2.4 | Ball Bearing | ball-bearing | 1× | 1 | · | part |
| 2.3 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 2.4 | Motor Housing | motor-housing | 1× | 1 | · | part |
| 3 | Electronic Speed Controller 5 parts | tiltrotor-uav-esc | 1× | 1 | 12 | assembly |
| 3.1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 3.2 | Power MOSFET | mosfet | 6× | 6 | · | part |
| 3.3 | Microcontroller | mcu | 1× | 1 | · | part |
| 3.4 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 3.5 | Connector | connector | 3× | 3 | · | part |
| 4 | Servo Motor 4 parts | servo-motor | 1× | 1 | 24 | assembly |
| 4.1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 4.1.1 | Stator Core (laminations) | stator-core | 1× | 1 | · | part |
| 4.1.2 | Copper Winding | copper-winding | 1× | 1 | · | part |
| 4.1.3 | Slot Insulation | stator-insulation | 1× | 1 | · | part |
| 4.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 4.2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | · | part |
| 4.2.2 | Rotor Core | rotor-core | 1× | 1 | · | part |
| 4.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | · | part |
| 4.2.4 | Ball Bearing | ball-bearing | 1× | 1 | · | part |
| 4.3 | Encoder | encoder | 1× | 1 | · | part |
| 4.4 | Motor Housing | motor-housing | 1× | 1 | · | part |
| 5 | Tilt Spindle | tiltrotor-uav-tilt-spindle | 1× | 1 | · | part |
| 6 | Hall Sensor | hall-sensor | 1× | 1 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the tilting rotor nacelle is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $2–$500. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Inovance
inovance.com ↗
|
Shenzhen, CN | Drives & motion control | 500 units | 10–14 wks |
| sonacomstar.com ↗ | Gurugram, IN | EV driveline & motors | 500 units | 10–14 wks |
| broad-ocean.com ↗ | Zhongshan, CN | Electric motors | 500 units | 10–14 wks |
| nidec.com ↗ | Singapore | Motors, regional ops | 500 units | 10–14 wks |
| bosch.in ↗ | Bengaluru, IN | Automotive components | 500 units | 10–14 wks |