Press Brake (Bending)
AssemblyHydraulic press with adjustable dies bending flat patterns at specified angles for rectangular ducts. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Press Brake (Bending)
7 top-level lines as of r51853| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Press Frame | ductwork-fabrication-line-press-brake-frame | 1× | 1 | · | part |
| 2 | Press Pump | ductwork-fabrication-line-press-brake-hydraulic-pump | 1× | 1 | · | part |
| 3 | Press Cylinder | ductwork-fabrication-line-press-brake-cylinder | 1× | 1 | · | part |
| 4 | Upper Die | ductwork-fabrication-line-press-brake-upper-die | 1× | 1 | · | part |
| 5 | Lower Die | ductwork-fabrication-line-press-brake-lower-die | 1× | 1 | · | part |
| 6 | Press Backstop | ductwork-fabrication-line-press-brake-backstop | 1× | 1 | · | part |
| 7 | Press Pedal Control | ductwork-fabrication-line-press-brake-control-foot-pedal | 1× | 1 | · | part |