Operator Control Station

Assembly

No photo yet. Seen one of these? Suggest a photo.

A ruggedized portable console with displays, hand controllers, and the radio that lets one operator drive the robot and arm simultaneously.

Direct parts	7
Total parts	15
Used in	1 assembly
Class	Assembly

Report a problem with this BOM

A ruggedized portable console with displays, hand controllers, and the radio that lets one operator drive the robot and arm simultaneously. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.

Operator Control Station parts and their functions

7 top-level parts · 15 parts in total · full bill of materials below

Operator Control Station parts diagram: 1 OCU case, 2 OCU display, 3 hand controller, 4 compute SoC module, 5 LiPo cell, 6 speaker, 7 touch digitizer. 15 parts in 7 top-level items. — Operator Control Station parts diagram. Numbers match the table below; each box is one top-level part or assembly with what it contains.

#	Part	Qty	What it does
1	OCU Case	1×	Sealed polymer or aluminum clamshell, MIL-STD-810 rated, wearable on a chest harness or set on a tailgate.
2	OCU Display	1×	Sunlight-readable touchscreen
3	Hand Controller	2×	Drive and manipulator
4	Compute SoC Module	1×	System-on-chip compute module carrying the application processor, memory, and storage that runs the device's operating system and user interface.
5	LiPo Cell	8×	Console battery
6	Speaker	1×	Electrodynamic loudspeaker: a voice coil in a magnet gap driving a cone or diaphragm to turn an audio signal into sound.
7	Touch Digitizer	1×	Transparent capacitive sensor layer bonded over a display that detects finger position and turns the screen into an input surface.

3D model

No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).

Build & assembly graph

expand / collapse · shared sub-assemblies converge · links to related products · est. labour

product / assembly shared across products atomic part related product

Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.

Bill of materials for Operator Control Station

7 top-level lines · 7 rows shown · 15 parts total · indented to 3 levels

#	Item / sub-assembly	Part no.	Qty/assy	Ext. qty	Parts	Type
1	OCU Case	bdr-ocu-case	1×	1	·	part
2	OCU Display	bdr-ocu-display	1×	1	·	part
3	Hand Controller	bdr-hand-controller	2×	2	·	part
4	Compute SoC Module	soc-module	1×	1	·	part
5	LiPo Cell	lipo-cell	8×	8	·	part
6	Speaker	speaker	1×	1	·	part
7	Touch Digitizer	touch-digitizer	1×	1	·	part

Something wrong in this list? Report a problem with this BOM.

Where the operator control station is used

1 product across 1 domain contain it, directly or inside a sub-assembly

Defense & Security 1 EOD Robot

Used in 1 assembly

EOD Robot

Sourcing: possible vendors

Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work

Vendor	HQ	Specialty	MOQ	Lead time
🇨🇳Foxconn foxconn.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Flex (Singapore) flex.com ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks
🇮🇳Dixon Technologies dixoninfo.com ↗	Noida, IN	Electronics contract mfg	1,000 pcs	6–10 wks
🇨🇳BYD Electronics bydelectronic.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Venture Corp venture.com.sg ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks