L-Band RF Front-End
AssemblyAnalog front-end translating between the L-band carrier and the digitizer IF via up/down converters. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for L-Band RF Front-End
8 top-level lines as of r149084| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 2 | Down-Converter | sm-downconverter | 1× | 1 | · | part |
| 3 | Up-Converter | sm-upconverter | 1× | 1 | · | part |
| 4 | Low-Noise Amplifier | sm-lna | 1× | 1 | · | part |
| 5 | Driver Amplifier | sm-pa-driver | 1× | 1 | · | part |
| 6 | Frequency Synthesizer | sm-synthesizer | 2× | 2 | · | part |
| 7 | RF Filter | sm-rf-filter | 4× | 4 | · | part |
| 8 | SMD Passive (R/C/L) | smd-passives | 200× | 200 | · | part |