Doubly-Fed Induction Generator
AssemblyWound-rotor induction generator delivering 2-4 MW at 690 V over a partial-converter slip ring feed. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Doubly-Fed Induction Generator parts and their functions
8 top-level parts · 30 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Stator Assembly 3 parts | 1× | Laminated stator core with three-phase windings |
| 2 | Rotor Assembly 4 parts | 1× | Wound rotor connected to the partial-scale converter |
| 3 | Slip Ring Unit | 1× | Slip ring and brush gear feeding the rotor windings |
| 4 | Ball Bearing | 2× | Insulated generator shaft bearings |
| 5 | Speed Encoder | 1× | Incremental encoder reporting generator speed and position |
| 6 | Generator Cooling Fan | 1× | Forced-air cooling fan on the generator frame |
| 7 | Oil Seal | 2× | Shaft seals retaining bearing grease |
| 8 | Fastener Set | 1× | Mounting bolts to the bedplate |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Doubly-Fed Induction Generator
8 top-level lines · 15 rows shown · 30 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 1.1 | Stator Core (laminations) | stator-core | 1× | 1 | · | part |
| 1.2 | Copper Winding | copper-winding | 1× | 1 | · | part |
| 1.3 | Slot Insulation | stator-insulation | 1× | 1 | · | part |
| 2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | · | part |
| 2.2 | Rotor Core | rotor-core | 1× | 1 | · | part |
| 2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | · | part |
| 2.4 | Ball Bearing | ball-bearing | 1× | 1 | · | part |
| 3 | Slip Ring Unit | wind-turbine-nacelle-slip-ring | 1× | 1 | · | part |
| 4 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 5 | Speed Encoder | wind-turbine-nacelle-encoder | 1× | 1 | · | part |
| 6 | Generator Cooling Fan | wind-turbine-nacelle-generator-fan | 1× | 1 | · | part |
| 7 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 8 | Fastener Set | fastener-set | 1× | 1 | · | part |
Something wrong in this list? Report a problem with this BOM.
Where the doubly-fed induction generator is used
2 products across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $2–$500. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Inovance
inovance.com ↗
|
Shenzhen, CN | Drives & motion control | 500 units | 10–14 wks |
| sonacomstar.com ↗ | Gurugram, IN | EV driveline & motors | 500 units | 10–14 wks |
| broad-ocean.com ↗ | Zhongshan, CN | Electric motors | 500 units | 10–14 wks |
| nidec.com ↗ | Singapore | Motors, regional ops | 500 units | 10–14 wks |
| bosch.in ↗ | Bengaluru, IN | Automotive components | 500 units | 10–14 wks |