Water Pump System
AssemblyThe lubrication loop: a centrifugal pump lifts filtered pool water to the start tub and spray nozzles, metered by valves and monitored by a flow switch that interlocks the ride open. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Water Pump System
8 top-level lines as of r187523| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Circulation Pump 8 parts | water-slide-circulation-pump | 1× | 1 | 0 | assembly |
| 2 | Riser Pipe | water-slide-riser-pipe | 1× | 1 | · | part |
| 3 | Start Tub Feed | water-slide-start-tub | 1× | 1 | · | part |
| 4 | Spray Nozzle | water-slide-spray-nozzle | 10× | 10 | · | part |
| 5 | Balance Valve | water-slide-balance-valve | 4× | 4 | · | part |
| 6 | Flow Switch | water-slide-flow-switch | 1× | 1 | · | part |
| 7 | Suction Strainer | water-slide-strainer | 1× | 1 | · | part |
| 8 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |