Power Base
AssemblyUniversal motor, drive coupling, and base housing. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Power Base parts and their functions
10 top-level parts · 49 parts in total · full bill of materials below
| # | Part | Qty | What it does |
|---|---|---|---|
| 1 | Universal Motor 7 parts | 1× | Series-wound AC universal motor, 600-900 W. |
| 2 | Drive Coupling 4 parts | 1× | Splined dog clutch that engages the blade base. |
| 3 | Cup Interlock 3 parts | 1× | Safety actuator that closes the circuit only when a cup is locked. |
| 4 | Press-to-Run Switch 3 parts | 1× | Momentary switch closed by pressing the cup down. |
| 5 | Thermal Cutoff | 1× | Resettable bimetal overheat protector. |
| 6 | Motor Mount | 1× | Rubber-isolated motor cradle. |
| 7 | Base Housing 3 parts | 1× | Two-shell plastic base enclosure. |
| 8 | Cooling Fan | 1× | Plastic axial fan on the motor shaft. |
| 9 | Vent Grille | 2× | Molded intake and exhaust louvers. |
| 10 | Fastener Set | 1× | Bolts, nuts, and washers. |
3D model
No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).
Build & assembly graph
expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly
shared across products
atomic part
related product
Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.
Bill of materials for Power Base
10 top-level lines · 37 rows shown · 49 parts total · indented to 3 levels| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Universal Motor 7 parts | personal-blender-motor | 1× | 1 | 30 | assembly |
| 1.1 | Stator Assembly 3 parts | stator-assembly | 1× | 1 | 3 | assembly |
| 1.1.1 | Stator Core (laminations) | stator-core | 1× | 1 | · | part |
| 1.1.2 | Copper Winding | copper-winding | 1× | 1 | · | part |
| 1.1.3 | Slot Insulation | stator-insulation | 1× | 1 | · | part |
| 1.2 | Rotor Assembly 4 parts | rotor-assembly | 1× | 1 | 19 | assembly |
| 1.2.1 | Rotor Shaft | rotor-shaft | 1× | 1 | · | part |
| 1.2.2 | Rotor Core | rotor-core | 1× | 1 | · | part |
| 1.2.3 | Neodymium Magnet | neodymium-magnet | 16× | 16 | · | part |
| 1.2.4 | Ball Bearing | ball-bearing | 1× | 1 | · | part |
| 1.3 | Carbon Brush | personal-blender-carbon-brush | 2× | 2 | · | part |
| 1.4 | Brush Holder | personal-blender-brush-holder | 2× | 2 | · | part |
| 1.5 | Ball Bearing | ball-bearing | 2× | 2 | · | part |
| 1.6 | Motor Shaft | personal-blender-motor-shaft | 1× | 1 | · | part |
| 1.7 | Motor Housing | personal-blender-motor-housing | 1× | 1 | · | part |
| 2 | Drive Coupling 4 parts | personal-blender-drive-coupling | 1× | 1 | 4 | assembly |
| 2.1 | Drive Dog | personal-blender-drive-dog | 1× | 1 | · | part |
| 2.2 | Coupling Collar | personal-blender-coupling-collar | 1× | 1 | · | part |
| 2.3 | Coupling Shaft Seal | personal-blender-shaft-seal | 1× | 1 | · | part |
| 2.4 | Coil Spring | coil-spring | 1× | 1 | · | part |
| 3 | Cup Interlock 3 parts | personal-blender-cup-interlock | 1× | 1 | 3 | assembly |
| 3.1 | Interlock Microswitch | personal-blender-interlock-switch | 1× | 1 | · | part |
| 3.2 | Interlock Cam | personal-blender-interlock-cam | 1× | 1 | · | part |
| 3.3 | Coil Spring | coil-spring | 1× | 1 | · | part |
| 4 | Press-to-Run Switch 3 parts | personal-blender-press-switch | 1× | 1 | 3 | assembly |
| 4.1 | Momentary Switch | personal-blender-momentary-switch | 1× | 1 | · | part |
| 4.2 | Switch Plunger | personal-blender-switch-plunger | 1× | 1 | · | part |
| 4.3 | Coil Spring | coil-spring | 1× | 1 | · | part |
| 5 | Thermal Cutoff | personal-blender-thermal-cutoff | 1× | 1 | · | part |
| 6 | Motor Mount | personal-blender-motor-mount | 1× | 1 | · | part |
| 7 | Base Housing 3 parts | personal-blender-base-housing | 1× | 1 | 3 | assembly |
| 7.1 | Upper Housing Shell | personal-blender-housing-upper | 1× | 1 | · | part |
| 7.2 | Lower Housing Shell | personal-blender-housing-lower | 1× | 1 | · | part |
| 7.3 | Fastener Set | fastener-set | 1× | 1 | · | part |
| 8 | Cooling Fan | personal-blender-cooling-fan | 1× | 1 | · | part |
| 9 | Vent Grille | personal-blender-vent-grille | 2× | 2 | · | part |
| 10 | Fastener Set | fastener-set | 1× | 1 | · | part |
Where the power base is used
1 product across 1 domain contain it, directly or inside a sub-assemblyUsed in 1 assembly
Sourcing: possible vendors
Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work| Vendor | HQ | Specialty | MOQ | Lead time |
|---|---|---|---|---|
|
🇨🇳Foxconn
foxconn.com ↗
|
Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| flex.com ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| dixoninfo.com ↗ | Noida, IN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| bydelectronic.com ↗ | Shenzhen, CN | Electronics contract mfg | 1,000 pcs | 6–10 wks |
| venture.com.sg ↗ | Singapore | Electronics contract mfg | 1,000 pcs | 6–10 wks |