Indoor Unit
AssemblyWall-mounted evaporator with cross-flow blower and controls. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Indoor Unit
9 top-level lines as of r1825| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Indoor Plastic Housing 3 parts | air-conditioner-indoor-housing | 1× | 1 | 0 | assembly |
| 2 | Evaporator Coil 3 parts | air-conditioner-evaporator-coil | 1× | 1 | 0 | assembly |
| 3 | Cross-Flow Blower 3 parts | air-conditioner-blower | 1× | 1 | 0 | assembly |
| 4 | Air Filter | air-conditioner-air-filter | 2× | 2 | · | part |
| 5 | Louver Assembly 2 parts | air-conditioner-louver | 1× | 1 | 0 | assembly |
| 6 | Condensate Drain Pan | air-conditioner-drain-pan | 1× | 1 | · | part |
| 7 | Indoor Control Board 5 parts | air-conditioner-control-board | 1× | 1 | 0 | assembly |
| 8 | IR Receiver Module | air-conditioner-ir-receiver | 1× | 1 | · | part |
| 9 | NTC Thermistor | air-conditioner-thermistor | 2× | 2 | · | part |