BOMwiki the bill-of-materials encyclopedia
30,454,201 parts mapped · 193,225 items
Discussion History

Kotatsu (Heated Table)

Product

Overview

A kotatsu is a heated table designed to warm a small family group sitting underneath a thick quilted blanket. The Table Frame supports a wooden Table Top, under which an electric Heater Assembly radiates warmth. A Temperature Controller regulates temperature, and the Futon Blanket draped over the tabletop traps the heated air, creating a warm nest even in an unheated room.

The design originated in medieval Japan but modernized in the 1950s with electric heating. Unlike room heating, a kotatsu concentrates warmth only where people are sitting, reducing overall energy use while maximizing comfort in winter. It serves as both furniture and a social gathering point.

How it works

The Heater Assembly is mounted underneath the tabletop on a Heater Mounting Bracket, where a Heating Element radiant coil glows orange-red when powered. A Safety Guard Cage prevents accidental contact. The Temperature Controller senses ambient temperature and cycles the heater on and off through a Relay, maintaining the set point on the Temperature Dial.

People sit around the table with the Futon Blanket draped over their laps and the tabletop. The blanket weight and the enclosed air pocket create an insulating cocoon, the heater runs at modest wattage because very little heat escapes. A Thermal Fuse in the heater cuts power if temperature ever exceeds a safe limit.

The Electrical Harness runs from a standard wall outlet through a Mains Power Cable to a Power Switch, then to the Terminal Box where connections feed the heater and thermostat control circuit. The entire electrical path is designed for safety: the cord has a grounded plug, the switch includes a thermal breaker, and a short cord keeps the connection away from foot traffic.

The Futon Mounting System system of Blanket Clip fasteners holds the blanket in place so it does not slip off during the evening. The blanket itself is constructed from Outer Fabric outer covering, Insulation Layer insulation, and Inner Backing inner lining, all quilted together.

Kotatsu (Heated Table) parts and their functions

7 top-level parts · 40 parts in total · full bill of materials below
Kotatsu (Heated Table) parts diagram: 1 table frame, 2 heater assembly, 3 temperature controller, 4 electrical harness, 5 table top, 6 futon mounting system, 7 futon blanket. 40 parts in 7 top-level items.
Kotatsu (Heated Table) parts diagram. Numbers match the table below; each box is one top-level part or assembly with what it contains.
#PartQtyWhat it does
1 Table Frame 3 parts 1× Table base and legs
2 Heater Assembly 5 parts 1× Heating element and guard assembly
3 Temperature Controller 5 parts 1× Temperature control system
4 Electrical Harness 5 parts 1× Electrical connections and safety
5 Table Top 3 parts 1× Wooden table surface
6 Futon Mounting System 3 parts 1× Mounting and cushioning system
7 Futon Blanket 3 parts 1× Insulating futon cover

3D model

No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).

Build & assembly graph

expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly shared across products atomic part related product

Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.

Bill of materials for Kotatsu (Heated Table)

7 top-level lines · 34 rows shown · 40 parts total · indented to 3 levels
# Item / sub-assembly Part no. Qty/assy Ext. qty Parts Type
1 Table Frame 3 parts kotatsu-frame 1× 1 10 assembly
1.1 Table Leg kotatsu-leg 4× 4 · part
1.2 Cross Stretcher kotatsu-stretcher-rail 4× 4 · part
1.3 Fastener Set fastener-set 2× 2 · part
2 Heater Assembly 5 parts kotatsu-heater-unit 1× 1 5 assembly
2.1 Heating Element heating-element 1× 1 · part
2.2 Safety Guard Cage kotatsu-heater-guard 1× 1 · part
2.3 Heater Mounting Bracket kotatsu-heater-bracket 1× 1 · part
2.4 Thermal Fuse thermal-fuse 1× 1 · part
2.5 Fastener Set fastener-set 1× 1 · part
3 Temperature Controller 5 parts kotatsu-thermostat 1× 1 5 assembly
3.1 Control PCB kotatsu-control-pcb 1× 1 · part
3.2 Thermal Sensor kotatsu-temperature-sensor 1× 1 · part
3.3 Temperature Dial kotatsu-control-dial 1× 1 · part
3.4 Microcontroller mcu 1× 1 · part
3.5 Relay relay 1× 1 · part
4 Electrical Harness 5 parts kotatsu-wiring-harness 1× 1 5 assembly
4.1 Mains Power Cable kotatsu-power-cable 1× 1 · part
4.2 Power Switch kotatsu-switch-assembly 1× 1 · part
4.3 Terminal Box kotatsu-junction-box 1× 1 · part
4.4 Wire Bundle wire-bundle 1× 1 · part
4.5 Fastener Set fastener-set 1× 1 · part
5 Table Top 3 parts kotatsu-top-plate 1× 1 3 assembly
5.1 Solid Wood Panel kotatsu-top-wood 1× 1 · part
5.2 Lacquer or Urethane kotatsu-top-finish 1× 1 · part
5.3 Fastener Set fastener-set 1× 1 · part
6 Futon Mounting System 3 parts kotatsu-futon-interface 1× 1 9 assembly
6.1 Blanket Clip kotatsu-futon-clip 4× 4 · part
6.2 Mounting Rail kotatsu-futon-rail 4× 4 · part
6.3 Fastener Set fastener-set 1× 1 · part
7 Futon Blanket 3 parts kotatsu-blanket 1× 1 3 assembly
7.1 Outer Fabric kotatsu-blanket-fabric 1× 1 · part
7.2 Insulation Layer kotatsu-batting 1× 1 · part
7.3 Inner Backing kotatsu-backing 1× 1 · part

Something wrong in this list? Report a problem with this BOM.

Sourcing: possible vendors

Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $150–$3k. How estimates work
VendorHQSpecialtyMOQLead time
🇺🇸Whirlpool
whirlpoolcorp.com ↗
Benton Harbor, US Home appliances 1,000 units 8–14 wks
bsh-group.com ↗ Munich, DE Appliances (Bosch, Siemens) 1,000 units 8–14 wks
🇸🇪Electrolux
electroluxgroup.com ↗
Stockholm, SE Home appliances 1,000 units 8–14 wks
lg.com ↗ Seoul, KR Appliances & electronics 1,000 units 8–14 wks
🇨🇳Haier
haier.com ↗
Qingdao, CN Home appliances 1,000 units 8–14 wks

335-word article