Setting Mechanism
AssemblyHydraulic piston and shear system that converts applied tubing or setting-tool pressure into the axial load that energizes the slips and packing element. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Setting Mechanism
9 top-level lines as of r49320| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Setting Piston | dhp-setting-piston | 1× | 1 | · | part |
| 2 | Setting Cylinder | dhp-setting-cylinder | 1× | 1 | · | part |
| 3 | Setting Shear Pin | dhp-shear-pin | 4× | 4 | · | part |
| 4 | Run-In Shear Screw | dhp-shear-screw | 6× | 6 | · | part |
| 5 | Setting Sleeve | dhp-setting-sleeve | 1× | 1 | · | part |
| 6 | Hold-Down Button | dhp-holddown-button | 8× | 8 | · | part |
| 7 | Atmospheric Chamber | dhp-atmospheric-chamber | 1× | 1 | · | part |
| 8 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |
| 9 | O-Ring Set | oring-set | 3× | 3 | · | part |