Slip and Cone System
AssemblyUpper and lower slip segments driven up tapered cones to bite into the casing wall and anchor the packer against axial load in both directions. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Slip and Cone System
7 top-level lines as of r49313| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Upper Slip Segment | dhp-upper-slip | 6× | 6 | · | part |
| 2 | Lower Slip Segment | dhp-lower-slip | 6× | 6 | · | part |
| 3 | Upper Cone | dhp-upper-cone | 1× | 1 | · | part |
| 4 | Lower Cone | dhp-lower-cone | 1× | 1 | · | part |
| 5 | Slip Retainer Band | dhp-slip-retainer | 2× | 2 | · | part |
| 6 | Slip Leaf Spring | dhp-slip-spring | 6× | 6 | · | part |
| 7 | Coil Spring | coil-spring | 2× | 2 | · | part |