Mixing Hopper
AssemblyThe funnel where dry material enters the fluid. A cone-shaped hopper feeds powder into a venturi throat; the pump-fed jet through the throat creates suction that pulls the powder down and wets it into the mud stream. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Mixing Hopper
7 top-level lines as of r50085| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Hopper Cone | dmmh-hopper-cone | 1× | 1 | · | part |
| 2 | Venturi Throat | dmmh-venturi-throat | 1× | 1 | · | part |
| 3 | Jet Nozzle | dmmh-jet-nozzle | 1× | 1 | · | part |
| 4 | Butterfly Valve | dmmh-butterfly-valve | 2× | 2 | · | part |
| 5 | Bag Breaker Grate | dmmh-bag-breaker | 1× | 1 | · | part |
| 6 | Wear Liner | dmmh-wear-liner | 1× | 1 | · | part |
| 7 | Fastener Set | fastener-set | 1× | 1 | · | part |