Control Panel
AssemblyThe enclosure that starts and stops the two vibrator motors, drives the angle actuator, and trips on overload or out-of-balance vibration. Built for a hazardous-area rig site. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control Panel
10 top-level lines as of r153363| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Ex Enclosure | shale-shaker-enclosure | 1× | 1 | · | part |
| 2 | Motor Starter | shale-shaker-vfd | 2× | 2 | · | part |
| 3 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 4 | Microcontroller | mcu | 1× | 1 | · | part |
| 5 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |
| 6 | Relay | relay | 4× | 4 | · | part |
| 7 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |
| 8 | Power Supply | power-supply | 1× | 1 | · | part |
| 9 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 10 | Connector | connector | 6× | 6 | · | part |