Fluid End
AssemblyThe wet end where three plungers draw CO2 in through suction valves and push it out through discharge valves; on a triplex pump this section sees the full discharge pressure and does all the pumping work. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Fluid End
13 top-level lines as of r31139| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Fluid-End Cylinder Block | co2-injection-pump-fluid-cylinder | 1× | 1 | · | part |
| 2 | Plunger | co2-injection-pump-plunger | 3× | 3 | · | part |
| 3 | Plunger Packing Set | co2-injection-pump-packing-set | 3× | 3 | · | part |
| 4 | Stuffing Box 1 parts | co2-injection-pump-stuffing-box | 3× | 3 | · | part |
| 5 | Suction Valve | co2-injection-pump-suction-valve | 3× | 3 | · | part |
| 6 | Discharge Valve | co2-injection-pump-discharge-valve | 3× | 3 | · | part |
| 7 | Valve Seat | co2-injection-pump-valve-seat | 6× | 6 | · | part |
| 8 | Valve Spring | co2-injection-pump-valve-spring | 6× | 6 | · | part |
| 9 | Valve Cover | co2-injection-pump-valve-cover | 6× | 6 | · | part |
| 10 | Suction Manifold | co2-injection-pump-suction-manifold | 1× | 1 | · | part |
| 11 | Discharge Manifold | co2-injection-pump-discharge-manifold | 1× | 1 | · | part |
| 12 | O-Ring Set | oring-set | 4× | 4 | · | part |
| 13 | Fastener Set | fastener-set | 2× | 2 | · | part |