Control Cabinet
AssemblyThe lineside cabinet holding the fail-safe sequencing logic, power supplies, and battery backup that runs the full crossing cycle and reports state to the interlocking. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Control Cabinet
10 top-level lines as of r98085| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Crossing Controller | level-crossing-barrier-crossing-controller | 1× | 1 | · | part |
| 2 | Backup Battery Bank | level-crossing-barrier-battery-bank | 1× | 1 | · | part |
| 3 | Event Recorder | level-crossing-barrier-event-recorder | 1× | 1 | · | part |
| 4 | Relay | relay | 8× | 8 | · | part |
| 5 | Power Supply | power-supply | 2× | 2 | · | part |
| 6 | Power MOSFET | mosfet | 4× | 4 | · | part |
| 7 | Bare PCB | pcb-bare | 3× | 3 | · | part |
| 8 | SMD Passive (R/C/L) | smd-passives | 3× | 3 | · | part |
| 9 | Connector | connector | 12× | 12 | · | part |
| 10 | Wire Bundle | wire-bundle | 2× | 2 | · | part |