Print Station
AssemblyOne color deck: a plate cylinder inked by an anilox roll through a doctor blade chamber, pressed against the web on the impression drum. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Print Station
9 top-level lines as of r65617| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Plate Cylinder | flexographic-printing-press-plate-cylinder | 1× | 1 | · | part |
| 2 | Photopolymer Plate | flexographic-printing-press-printing-plate | 1× | 1 | · | part |
| 3 | Mounting Tape | flexographic-printing-press-mounting-tape | 1× | 1 | · | part |
| 4 | Anilox Roll 4 parts | flexographic-printing-press-anilox-roll | 1× | 1 | 0 | assembly |
| 5 | Doctor Blade Chamber 4 parts | flexographic-printing-press-doctor-chamber | 1× | 1 | 0 | assembly |
| 6 | Ink Pump | flexographic-printing-press-ink-pump | 1× | 1 | · | part |
| 7 | Bearer Block | flexographic-printing-press-bearer-block | 2× | 2 | · | part |
| 8 | Servo Motor 4 parts | servo-motor | 2× | 2 | 0 | assembly |
| 9 | Ball Bearing | ball-bearing | 4× | 4 | · | part |