Hydraulic Pump Unit
AssemblySingle-acting piston pump and lift ram in one cast body; handle strokes pressurise oil under the ram to raise the forks. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Hydraulic Pump Unit
9 top-level lines as of r102058| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Pump Body Casting | manual-pallet-jack-pump-body | 1× | 1 | · | part |
| 2 | Pump Plunger | manual-pallet-jack-pump-piston | 1× | 1 | · | part |
| 3 | Lift Ram | manual-pallet-jack-ram | 1× | 1 | · | part |
| 4 | Release Valve | manual-pallet-jack-release-valve | 1× | 1 | · | part |
| 5 | Pressure Relief Valve | manual-pallet-jack-relief-valve | 1× | 1 | · | part |
| 6 | Check Valve | manual-pallet-jack-check-valve | 2× | 2 | · | part |
| 7 | O-Ring Set | oring-set | 1× | 1 | · | part |
| 8 | Oil Seal | oil-seal | 2× | 2 | · | part |
| 9 | Hydraulic Oil Fill | manual-pallet-jack-hydraulic-oil | 1× | 1 | · | part |