Electrical System
AssemblyA 12 V system with a load-moment indicator that reads boom angle, extension, and load to cut functions before the machine can tip. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Electrical System
10 top-level lines as of r170911| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Battery | rtf-battery | 1× | 1 | · | part |
| 2 | Alternator | rtf-alternator | 1× | 1 | · | part |
| 3 | Starter Motor | rtf-starter-motor | 1× | 1 | · | part |
| 4 | Load-Moment Controller 4 parts | th-lmi-controller | 1× | 1 | 0 | assembly |
| 5 | Boom Angle Sensor | th-boom-angle-sensor | 1× | 1 | · | part |
| 6 | Extension Sensor | th-extension-sensor | 1× | 1 | · | part |
| 7 | Work Light | rtf-work-light | 4× | 4 | · | part |
| 8 | Wire Bundle | wire-bundle | 1× | 1 | · | part |
| 9 | Relay | relay | 8× | 8 | · | part |
| 10 | Connector | connector | 30× | 30 | · | part |