Extruder Unit
AssemblyMelting resin and pumping molten polymer to spinnerets at controlled temperature and pressure. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Extruder Unit
6 top-level lines as of r115167| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Material Hopper | nonwoven-spunbond-line-hopper | 1× | 1 | · | part |
| 2 | Extruder Screw and Barrel | nonwoven-spunbond-line-screw-barrel | 1× | 1 | · | part |
| 3 | Heating Element | nonwoven-spunbond-line-heater-zones | 3× | 3 | · | part |
| 4 | Melt Gear Pump | nonwoven-spunbond-line-melt-pump | 1× | 1 | · | part |
| 5 | Filter Pack | nonwoven-spunbond-line-filter-pack | 1× | 1 | · | part |
| 6 | Extruder Drive Motor | nonwoven-spunbond-line-extruder-motor | 1× | 1 | · | part |