Suction & Threading System
AssemblyThe vacuum system used to thread up. A suction gun pulls the yarn end down through the hollow spindle and out at the base, then the operator catches it at the balloon guide. The same suction clears broken ends and waste from the spindle area. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Suction & Threading System
5 top-level lines as of r178956| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Threading Suction Gun | two-for-one-twister-suction-gun | 4× | 4 | · | part |
| 2 | Suction Duct | two-for-one-twister-suction-duct | 1× | 1 | · | part |
| 3 | Suction Blower 3 parts | two-for-one-twister-blower | 1× | 1 | 0 | assembly |
| 4 | Threading Air Valve | two-for-one-twister-air-valve | 8× | 8 | · | part |
| 5 | Pressure Sensor | pressure-sensor | 1× | 1 | · | part |