Water Filtration & Recirculation

Assembly

No photo yet. Seen one of these? Suggest a photo.

Closed loop that collects spent jet water, strips out fiber fines and air, then returns clean water to the high-pressure pumps so the line uses little fresh make-up.

Direct parts	7
Total parts	68
Used in	1 assembly
Class	Assembly

Report a problem with this BOM

Closed loop that collects spent jet water, strips out fiber fines and air, then returns clean water to the high-pressure pumps so the line uses little fresh make-up. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.

Water Filtration & Recirculation parts and their functions

7 top-level parts · 68 parts in total · full bill of materials below

Water Filtration & Recirculation parts diagram: 1 collection tank, 2 sand filter, 3 bag filter, 4 transfer pump, 5 heat exchanger, 6 process piping set, 7 pressure sensor. 68 parts in 7 top-level items. — Water Filtration & Recirculation parts diagram. Numbers match the table below; each box is one top-level part or assembly with what it contains.

#	Part	Qty	What it does
1	Collection Tank	1×	Stainless reservoir under the line that buffers drained process water.
2	Sand Filter 3 parts	2×	Pressurised multimedia filter that removes suspended fiber fines from the recirculated water.
3	Bag Filter	4×	Fine polishing bag filter on the pump suction line.
4	Transfer Pump 5 parts	2×	Centrifugal pump that moves water between tanks and filter stages.
5	Heat Exchanger	1×	Plate exchanger that holds recirculated water at a stable temperature.
6	Process Piping Set	1×	Stainless pipework, manifolds and valves linking tanks, filters and pumps.
7	Pressure Sensor	3×	Transduces fluid or gas pressure into an electrical signal.

3D model

No 3D model yet. Have a CAD file of this? Add a 3D model. STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).

Build & assembly graph

expand / collapse · shared sub-assemblies converge · links to related products · est. labour

product / assembly shared across products atomic part related product

Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.

Bill of materials for Water Filtration & Recirculation

7 top-level lines · 22 rows shown · 68 parts total · indented to 3 levels

#	Item / sub-assembly	Part no.	Qty/assy	Ext. qty	Parts	Type
1	Collection Tank	spunlace-nonwoven-line-collection-tank	1×	1	·	part
2	Sand Filter 3 parts	spunlace-nonwoven-line-sand-filter	2×	2	3	assembly
2.1	Filter Vessel	spunlace-nonwoven-line-filter-vessel	1×	2	·	part
2.2	Filter Media	spunlace-nonwoven-line-filter-media	1×	2	·	part
2.3	Backwash Valve	spunlace-nonwoven-line-backwash-valve	1×	2	·	part
3	Bag Filter	spunlace-nonwoven-line-bag-filter	4×	4	·	part
4	Transfer Pump 5 parts	spunlace-nonwoven-line-transfer-pump	2×	2	26	assembly
4.1	Stator Assembly 3 parts	stator-assembly	1×	2	3	assembly
4.1.1	Stator Core (laminations)	stator-core	1×	2	·	part
4.1.2	Copper Winding	copper-winding	1×	2	·	part
4.1.3	Slot Insulation	stator-insulation	1×	2	·	part
4.2	Rotor Assembly 4 parts	rotor-assembly	1×	2	19	assembly
4.2.1	Rotor Shaft	rotor-shaft	1×	2	·	part
4.2.2	Rotor Core	rotor-core	1×	2	·	part
4.2.3	Neodymium Magnet	neodymium-magnet	16×	32	·	part
4.2.4	Ball Bearing	ball-bearing	1×	2	·	part
4.3	Impeller	spunlace-nonwoven-line-impeller	1×	2	·	part
4.4	Ball Bearing	ball-bearing	2×	4	·	part
4.5	Oil Seal	oil-seal	1×	2	·	part
5	Heat Exchanger	spunlace-nonwoven-line-heat-exchanger	1×	1	·	part
6	Process Piping Set	spunlace-nonwoven-line-piping-set	1×	1	·	part
7	Pressure Sensor	pressure-sensor	3×	3	·	part

Something wrong in this list? Report a problem with this BOM.

Where the water filtration & recirculation is used

1 product across 1 domain contain it, directly or inside a sub-assembly

Textiles & Apparel Machinery 1 Spunlace Nonwoven Line

Used in 1 assembly

Spunlace Nonwoven Line

Sourcing: possible vendors

Browse the supplier directory → Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $0.50–$100. How estimates work

Vendor	HQ	Specialty	MOQ	Lead time
🇨🇳Foxconn foxconn.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Flex (Singapore) flex.com ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks
🇮🇳Dixon Technologies dixoninfo.com ↗	Noida, IN	Electronics contract mfg	1,000 pcs	6–10 wks
🇨🇳BYD Electronics bydelectronic.com ↗	Shenzhen, CN	Electronics contract mfg	1,000 pcs	6–10 wks
🇸🇬Venture Corp venture.com.sg ↗	Singapore	Electronics contract mfg	1,000 pcs	6–10 wks