Film Back Door
AssemblyHinged light-tight door whose sprung pressure plate holds the film flat against the gate rails during exposure. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Film Back Door
5 top-level lines as of r62972| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Door Panel | film-camera-35mm-door-panel | 1× | 1 | · | part |
| 2 | Pressure Plate | film-camera-35mm-pressure-plate | 1× | 1 | · | part |
| 3 | Coil Spring | coil-spring | 2× | 2 | · | part |
| 4 | Light Seal Foam | film-camera-35mm-light-seals | 1× | 1 | · | part |
| 5 | Door Latch | film-camera-35mm-door-latch | 1× | 1 | · | part |