BOMwiki the bill-of-materials encyclopedia
30,454,201 parts mapped · 193,225 items

You are viewing r115759 of this page, not the current version. Go to current · history

Off-Road SUV

Product

Overview

An off-road SUV is a body-on-frame utility vehicle engineered for travel over unpaved, broken, and steep terrain. Unlike a car-based crossover, it separates the structure into a stiff Ladder Frame chassis and a bolted-on Steel Body. This split lets the frame carry suspension and drivetrain loads while the body flexes independently, which improves durability on rough ground and simplifies repair. The defining traits are a low-range transfer case, solid driven axles, long suspension travel, and high ground clearance.

These vehicles trade on-road refinement and fuel economy for capability. They are used for expedition travel, towing, agriculture, and work in places without sealed roads.

Frame and body

The Ladder Frame is built from two boxed Frame Rail members tied together by five Crossmember sections. The body sits on the frame through eight rubber Rubber Body Mount isolators, which absorb vibration and allow controlled relative movement. Two Recovery Tow Hook recovery points are welded directly to the rails.

The Steel Body is a galvanized steel Body Shell carrying four Door Assembly units and the Hood. Underbody protection comes from three Skid Plate panels that shield the engine, transmission, and fuel tank from rocks. The Steel Front Bumper is a heavy steel beam with an integrated Recovery Winch for self-recovery, driven by the Winch Motor through a Helical Gear Pair onto the Winch Drum.

Engine

The V6 Turbo-Diesel Engine is a 3.0 L common-rail turbo-diesel V6, chosen for high low-speed torque. The Engine Block is cast in compacted graphite iron, holding six Piston assemblies on a forged Crankshaft. Two Cylinder Head castings each carry valves and a Glow Plug for cold starting. Boost is supplied by the Variable-Geometry Turbo, a variable-geometry unit whose Vane Actuator adjusts vane angle to build pressure across the engine speed range. Fuel is metered by six Common-Rail Injector units fed from the High-Pressure Fuel Pump at very high pressure for clean combustion.

Drivetrain and four-wheel drive

Engine power passes through the Automatic Transmission, a 6-speed automatic with a deep first gear for crawling. From there the Transfer Case splits torque between axles. Its Low-Range Reduction Gear provides a low range that multiplies torque for steep climbs, and the Lockable Center Differential can be locked to force equal drive front and rear. Range is selected by the Range Shift Motor.

The Front Drive Axle and Live Rear Axle are both driven. The front uses CV-jointed halfshafts so the wheels can steer while driving, while the Live Rear Axle is a solid banjo housing with a Rear Differential Locker that mechanically ties both rear wheels together for maximum traction. The hypoid Helical Gear Pair in each axle sets the final drive ratio.

Suspension, wheels, and brakes

The Suspension System is a coil-sprung solid-axle layout tuned for travel rather than precision. Each Coil-Damper Corner combines a Coil Spring with a long-stroke Shock Absorber. Axles are located by four Suspension Control Link arms and a Panhard Rod each. The Disconnecting Stabilizer Bar can disconnect to free up articulation on the trail. Wheels are fitted with all-terrain tires through the Off-Road Wheel assemblies. Stopping is handled by the Brake System, with four-wheel discs at the Brake Corner units modulated by the ABS Module.

Interior and electrical

The Interior seats five through Seat Assembly units and includes the Dashboard with its Instrument Cluster, Infotainment Head Unit, and a dedicated Off-Road Switch Panel for diff locks and traction modes. The Electrical System system runs a dual 12 V Battery setup so accessories and the Recovery Winch do not flatten the starting battery, charged by a high-output Heavy-Duty Alternator. Several Electronic Control Unit units manage the engine, transmission, and four-wheel-drive logic, and an Auxiliary LED Light Bar bar supplements the headlamps.

Materials and durability

Off-road SUVs are built for abuse and long service life. The Frame Rail members are boxed high-strength steel for resistance to twisting over uneven ground. The Live Rear Axle housing is cast iron in a banjo form that survives impacts and supports heavy loads. The Skid Plate panels are thick steel to take direct rock strikes without deforming into the components above. The diesel Engine Block is compacted graphite iron, which tolerates the high cylinder pressures of a turbo-diesel and the long duty cycles of towing and slow off-road crawling. Body panels are galvanized to resist corrosion from mud, water, and road salt. These choices add weight, which is why an off-road SUV is far heavier than a similarly sized crossover, but they deliver the durability the vehicle is bought for.

How four-wheel drive is used

The driver selects drive modes manually. On dry pavement the Transfer Case runs in two-wheel-drive high range or an automatic mode for fuel economy. On loose surfaces, four-wheel-drive high range splits torque to both the Front Drive Axle and Live Rear Axle. For steep, slow, or technical terrain, the driver shifts the Low-Range Reduction Gear into low range using the Range Shift Motor, which multiplies engine torque several times over for crawling control and lets the vehicle descend steep grades on engine braking alone. When a wheel lifts or loses grip, the Rear Differential Locker and the Lockable Center Differential lock can be engaged so both wheels on an axle, and both axles, turn together regardless of traction. Long suspension travel from the Coil-Damper Corner units keeps tires on the ground across ruts and rocks.

Variants and use

Off-road SUVs are offered with diesel and gasoline engines, manual or automatic transmissions, and varying levels of locking differentials. Heavy-duty versions add raised air intakes for deeper wading and reinforced Ladder Frame chassis for extreme loads. Optional equipment includes the Recovery Winch for self-recovery, an Auxiliary LED Light Bar bar for night driving, and the dual 12 V Battery system for running camp and field equipment. The vehicle suits expedition travel, towing, and remote work where the combination of low-range gearing, axle articulation, and underbody protection is essential.

Bill of materials for Off-Road SUV

11 top-level lines as of r115759
# Item / sub-assembly Part no. Qty/assy Ext. qty Parts Type
1 Ladder Frame 5 parts off-road-suv-ladder-frame 1× 1 0 assembly
2 Steel Body 7 parts off-road-suv-body 1× 1 0 assembly
3 V6 Turbo-Diesel Engine 12 parts off-road-suv-engine 1× 1 0 assembly
4 Automatic Transmission 6 parts off-road-suv-transmission 1× 1 0 assembly
5 Transfer Case 7 parts off-road-suv-transfer-case 1× 1 0 assembly
6 Front Drive Axle 8 parts off-road-suv-front-axle 1× 1 0 assembly
7 Live Rear Axle 7 parts off-road-suv-rear-axle 1× 1 0 assembly
8 Suspension System 5 parts off-road-suv-suspension 1× 1 0 assembly
9 Brake System 4 parts off-road-suv-brake-system 1× 1 0 assembly
10 Interior 4 parts off-road-suv-interior 1× 1 0 assembly
11 Electrical System 5 parts off-road-suv-electrical 1× 1 0 assembly

1,166-word article