BOMwiki the bill-of-materials encyclopedia
30,467,668 parts mapped · 192,925 items

This page is machine-generated and unverified (what this means). Treat details as provisional. If you know this hardware, weigh in or correct it directly with Edit.

Discussion History

Control & Display Panel

Assembly

Touchscreen interface with cycle programs and status monitoring. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.

Control & Display Panel parts and their functions

7 top-level parts · 15 parts in total · full bill of materials below
Control & Display Panel parts diagram: 1 LCD panel, 2 touch digitizer, 3 microcontroller, 4 bare PCB, 5 physical button keypad, 6 relay, 7 connector. 15 parts in 7 assemblies.
Control & Display Panel parts diagram. Numbers match the table below; each box is one top-level part or assembly with what it contains.
#PartQtyWhat it does
1 LCD Panel 1× Liquid-crystal display module with backlight and driver electronics that shows the machine's readouts, menus, and status to the operator.
2 Touch Digitizer 1× Transparent capacitive sensor layer bonded over a display that detects finger position and turns the screen into an input surface.
3 Microcontroller 1× Single-chip microcontroller combining a processor core, flash memory, RAM, and peripherals such as timers, ADCs, and serial ports to run the device's control firmware.
4 Bare PCB 1× Unpopulated printed circuit board: copper traces etched on an FR-4 glass-epoxy laminate that carry current between the components later soldered to it.
5 Physical Button Keypad 1× Emergency stop and manual cycle controls.
6 Relay 4× Electromechanical switch in which a small coil current closes or opens contacts rated for a much larger load, isolating control circuits from what they switch.
7 Connector 6× Mating plug-and-socket pair that joins two lengths of wiring or a cable to a board so a circuit can be assembled, serviced, and separated without soldering.

3D model

No 3D model yet. Have a CAD file of this? Add a 3D model — STL renders right on this page; STEP, FreeCAD, and OpenSCAD sources are welcome too (openly licensed, like all 3D models on BOMwiki).

Build & assembly graph

expand / collapse · shared sub-assemblies converge · links to related products · est. labour
product / assembly shared across products atomic part related product

Tap an assembly to expand/collapse · tap a part to open it · use “Open page” for any node · drag to pan, scroll to zoom.

Bill of materials for Control & Display Panel

7 top-level lines · 7 rows shown · 15 parts total · indented to 3 levels
# Item / sub-assembly Part no. Qty/assy Ext. qty Parts Type
1 LCD Panel lcd-panel 1× 1 · part
2 Touch Digitizer touch-digitizer 1× 1 · part
3 Microcontroller mcu 1× 1 · part
4 Bare PCB pcb-bare 1× 1 · part
5 Physical Button Keypad endoscope-washer-key-pad 1× 1 · part
6 Relay relay 4× 4 · part
7 Connector connector 6× 6 · part

Where the control & display panel is used

1 product across 1 domain contain it, directly or inside a sub-assembly

Used in 1 assembly

Endoscope Washer-Disinfector

Sourcing: possible vendors

Prices, MOQ, and lead times are algorithmic estimates, not quotes, and not claims about these companies. Company mappings are curated by keyword; est. price band $3–$400. How estimates work
VendorHQSpecialtyMOQLead time
🇨🇳BOE
boe.com ↗ 		Beijing, CN Display panels 1,000 pcs 6–10 wks
🇨🇳Tianma
tianma.com ↗ 		Shenzhen, CN Display panels 1,000 pcs 6–10 wks
🇨🇳TCL CSOT
szcsot.com ↗ 		Shenzhen, CN Display panels 1,000 pcs 6–10 wks
🇨🇳Truly Opto
truly.net ↗ 		Shanwei, CN Displays & camera modules 1,000 pcs 6–10 wks
🇸🇬Venture Corp
venture.com.sg ↗ 		Singapore Electronics contract mfg 1,000 pcs 6–10 wks