Power Distribution and Charging Controller
AssemblyCentral power management hub allocating utility input across up to 12 simultaneous battery chargers. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Power Distribution and Charging Controller
6 top-level lines as of r12773| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Three-Phase Rectifier | battery-swap-station-main-rectifier | 1× | 1 | · | part |
| 2 | Charger Enable Relay | battery-swap-station-distribution-contactor | 12× | 12 | · | part |
| 3 | Power Management Microcontroller | battery-swap-station-load-balancer | 1× | 1 | · | part |
| 4 | Bare PCB | pcb-bare | 1× | 1 | · | part |
| 5 | IGBT Power Module | igbt-module | 4× | 4 | · | part |
| 6 | SMD Passive (R/C/L) | smd-passives | 1× | 1 | · | part |