Heated Water Bath
AssemblyAn immersion heater warms the bath and a circulation pump keeps every vessel within a fraction of a degree of 37 °C, with a thermal fuse guarding against a heater fault. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Heated Water Bath
5 top-level lines as of r47568| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Bath Tank | dt-bath-tank | 1× | 1 | · | part |
| 2 | Heating Element | heating-element | 1× | 1 | · | part |
| 3 | Thermal Fuse | thermal-fuse | 1× | 1 | · | part |
| 4 | Circulation Pump 4 parts | dt-circulation-pump | 1× | 1 | 0 | assembly |
| 5 | Bath Temperature Sensor | dt-bath-rtd | 1× | 1 | · | part |