Gas Handling System
AssemblyInlet and outlet ductwork, isolation dampers, and expansion joints routing flue gas through the absorber. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for Gas Handling System
8 top-level lines as of r66824| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Flue Gas Inlet Duct | flue-gas-desulfurization-scrubber-inlet-duct | 1× | 1 | · | part |
| 2 | Clean Gas Outlet Duct | flue-gas-desulfurization-scrubber-outlet-duct | 1× | 1 | · | part |
| 3 | Inlet Isolation Damper | flue-gas-desulfurization-scrubber-inlet-damper | 1× | 1 | · | part |
| 4 | Outlet Isolation Damper | flue-gas-desulfurization-scrubber-outlet-damper | 1× | 1 | · | part |
| 5 | Fabric Expansion Joint | flue-gas-desulfurization-scrubber-expansion-joint | 4× | 4 | · | part |
| 6 | Wet Stack Liner | flue-gas-desulfurization-scrubber-wet-stack-liner | 1× | 1 | · | part |
| 7 | Induced Draft Booster Fan | flue-gas-desulfurization-scrubber-booster-fan | 1× | 1 | · | part |
| 8 | Booster Fan Motor | flue-gas-desulfurization-scrubber-fan-motor | 1× | 1 | · | part |