pH Electrode
AssemblyCombination glass electrode: a pH-sensitive glass bulb develops a potential against the sample, an internal Ag/AgCl half-cell and reference electrolyte close the circuit through a porous junction, and a BNC connector and cable carry the signal out. A full specification article for this item is being written. Meanwhile its bill of materials and connections are below.
Bill of materials for pH Electrode
9 top-level lines as of r124306| # | Item / sub-assembly | Part no. | Qty/assy | Ext. qty | Parts | Type |
|---|---|---|---|---|---|---|
| 1 | Glass Bulb | ph-meter-glass-bulb | 1× | 1 | · | part |
| 2 | Ag/AgCl Reference Wire | ph-meter-ag-agcl | 1× | 1 | · | part |
| 3 | Reference Junction | ph-meter-junction | 1× | 1 | · | part |
| 4 | Internal Buffer | ph-meter-internal-buffer | 1× | 1 | · | part |
| 5 | Reference Electrolyte | ph-meter-ref-electrolyte | 1× | 1 | · | part |
| 6 | Electrode Body | ph-meter-electrode-body | 1× | 1 | · | part |
| 7 | BNC Plug | ph-meter-bnc-plug | 1× | 1 | · | part |
| 8 | Electrode Cable | ph-meter-electrode-cable | 1× | 1 | · | part |
| 9 | O-Ring Set | oring-set | 1× | 1 | · | part |